User Guide

94
3
Taking Pictures
* When [Shake Reduction] in the [ARec. Mode] menu is set to [CCD-Shift]
(p.116), the CCD shifting sound may occur during shooting. This is not a
malfunction.
1 Press the four-way controller (2) in A mode.
The [Drive Mode] screen appears.
2 Use the four-way controller (45)
to select, j, A, B or C and
press the 4 button.
The camera is ready to take a series of
pictures.
3 Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
4 Press the shutter release button fully.
Pictures are taken continuously as long as you keep the shutter
release button pressed.
A
Burst
Shooting(L)
The number of recorded pixels is fixed at f (2592×1944) and
pictures are taken consecutively. The interval between shots
becomes shorter in the following sequence: A, B, and C.
B
Burst
Shooting(M)
C
Burst
Shooting(H)
*
The number of pictures that can be taken consecutively and the frame
rate per second vary depending on the shooting condition.
Shutter release
button
Four-way controller
4 button
OK
O K
OK
OK
MENU
Cancel
C a n c el
Cancel
MENU
Cancel
C a n c el
Cancel
MENU
Cancel
C a n c el
Cancel
MENU
Cancel
C a n c el
Cancel
MENU
Cancel
C a n c el
Cancel
Drive Mode
D r i v e Mo de
Continuous Shooting
C o n t in uo us S h o o t i n g
Drive Mode
Continuous Shooting