e01KB335_33e.qk 6/6/02 4:30 PM Page 1 (1,1) Digital Camera Operating Manual To ensure the best performance from your camera, please read the Operating Manual before using the camera.
e01KB335_33e.qk 6/6/02 4:30 PM Page 2 (1,1) Thank you for buying the Pentax Digital Camera. Please read this manual before using the camera in order to get the most out of all the features and functions. Keep this manual safe, as it can be a valuable tool in helping you to understand the camera’s capabilities. FOR SAFE USE OF YOUR CAMERA Sufficient attention has been paid to the safety of this product but please pay particular attention to the warnings indicated by the following symbols during use.
e01KB335_33e.qk 6/6/02 4:30 PM Page 2 (1,1) Care to be Taken During Handling • Do not clean the product with organic solvents such as thinner or alcohol benzene. • Places of high temperature and humidity should be avoided. Particular care should be taken regarding vehicles, which can become very hot inside. • Storing the camera where pesticides and chemicals are handled should be avoided. Remove from case and store in a well-ventilated place to prevent the camera from becoming moldy during storage.
e01KB335_33e.
e01KB335_33e.qk 6/6/02 4:30 PM Page 6 (1,1) Checking the Contents of the Package Names of Parts Front Shutter release button Remote control receiver Flash light sensor Power switch Viewfinder Self-timer lamp/AF spotbeam Built-in flash Camera Optio 430RS or Optio 330RS Rechargeable lithium-ion battery D-LI2 Battery charger D-BC2 Terminal cover (Rotate and open this cover to use the USB or DC input terminal.
e01KB335_33e.qk 6/6/02 4:30 PM Page 8 (1,1) Getting Started Attaching the Strap Names of Operating Parts Diopter adjustment lever button Getting Started / /DPOF button Power switch Shutter release button Mode dial Zoom/ button / button Menu button x z Playback/OK button Four-way controller ( ) Display button Status lamp Flash lamp Pass the narrow end of the strap through the strap lug and pass the other end through the loop.
e01KB335_33e.qk 6/6/02 4:30 PM Page 10 (1,1) Powering the Camera Battery Battery c Battery chamber cover To power outlet AC plug cord Battery charger Charging indicator z Installing the Battery Install the battery provided. When using the camera for the first time, charge the battery before installing. Charging the Battery When using the camera for the first time or when the [Battery depleted.] message is displayed, charge the battery.
e01KB335_33e.qk 6/6/02 4:30 PM Page 12 (1,1) ● Approximate Operating Time (when fully charged) Number of recordable images : Approx. 250 (with the flash fired for 50% of the shots. LCD monitor ON) Playback time : Approx. 150 min. z Terminal cover AC adapter To Power outlet * The above table is based on Pentax measuring conditions and may vary depending on capture mode and shooting conditions. Performance of the battery may deteriorate in low temperatures.
e01KB335_33e.qk 6/6/02 4:30 PM Page 14 (1,1) Installing or removing the CF Card CF card cover CF card eject button Captured images are recorded on the CompactFlash (CF) card. Make sure that the camera is turned off before inserting or removing the CF card (optional). When no card is inserted, the images are recorded in the camera’s built-in memory (11MB). Installing the Card z x c Open the CF card cover.
e01KB335_33e.qk 6/6/02 4:30 PM Page 16 (1,1) Initial Settings Setting the Home Town You can choose the city (Home Town) in which you will use the camera. Power switch Four-way controller x Playback/OK button English City DST Press the four-way controller ( ) to select the desired city (Home Town). MENU NYC Exit OK Ok Press the four-way controller ( ). The screen for setting the next item will be displayed.
e01KB335_33e.qk 6/6/02 4:30 PM Page 18 (1,1) n Setting the Date and Time Set the current date and time. z ) memo Date Adjust 1 / 1 / 2002 00 : 00 DISP x Press the four-way controller ( and will be displayed above and below the day. ). 12/24 MENU Exit OK Ok OK Ok OK Ok OK Ok • When the initial settings screen is displayed, you can cancel the setting operation and switch to Capture mode by pressing the MENU button.
e02KB335_33e.qk 6/6/02 4:28 PM Page 20 (1,1) Quick Start v Taking Still Pictures Shutter release button Mode dial Power switch Zoom button Using the Shutter Release Button LCD monitor For the simplest procedure to take still pictures: The flash fires automatically depending on the light conditions. x c Press the power switch. The camera will turn on. Set the mode dial to 200 . Turn the LCD monitor on. Press the Display button to display the shooting screen on the LCD monitor.
e02KB335_33e.qk 6/6/02 4:28 PM Page 22 (1,1) Quick Start Playing Back Still Pictures LCD monitor Playback/OK button Playback/OK button Quick Start Four-way controller Playing Back Previous or Next Images Playing Back Images Still images can be played back one at a time, proceeding either forward or backward. You can display the still picture. z memo Press the Playback/OK button after taking a picture. The image taken will be displayed on the LCD monitor.
e02KB335_33e.qk 6/6/02 4:28 PM Page 24 (1,1) Quick Start How to Use the CF Card When the CF card is inserted into the camera, images taken are recorded on the card. You can view the images recorded on the card on the camera itself, transfer them to your PC and print them out. Viewing images on a PC Viewing Images with Windows PC Viewing Images with Macintosh p.87 Quick Start Quick Start You only need to install the USB driver the first time.
e03KB335_33e.qk 6/6/02 4:38 PM Page 26 (1,1) Common Operations Turning the Camera On and Off Power switch Changing the Mode Capture mode is for taking pictures and Playback mode is for playing back or erasing images. Press the Playback/OK button to change the mode between Capture mode and Playback mode. Pressing the Playback/OK button halfway during Playback mode also moves the camera to Capture mode. Capture Mode Most of the settings are made p.
e03KB335_33e.qk 6/6/02 4:38 PM Page 28 (1,1) Using the Button Functions qwe q wer rt y u i o t y u i o !0 Capture Mode Playback Mode q button Deletes the image. ( p.81) w DPOF button Sets the print service. ( p.84) e button Protects the image from erasure. ( p.83) r Zoom button Changes the size of the image displayed on the LCD monitor. ( p.76) t button Displays nine images at once. ( p.80) y Menu button Displays the active menus in Play mode. ( p.32, p.
e03KB335_33e.qk 6/6/02 4:38 PM Page 30 (1,1) Example of menu operation Using the Menus z When you press the Menu button, the menus are displayed on the LCD monitor. You can set shooting functions, save the values set for shooting when the power is off, and change the camera settings on these menus. When you are making settings from a menu, a guide to operation is displayed on the LCD monitor. c v v’ b Caution Press the Menu button. The menu screen will be displayed.
e03KB335_33e.qk 6/6/02 4:38 PM Page 32 (1,1) Active Menus in Capture/Playback Mode Menu List ● [Set-up] Menu ● [Rec.Mode] Menu Item Item Description Default Setting Reference Default Setting Reference – p.112 Copy Image For copying images from the built-in memory to the CF card and vice versa. – p.106 p.64 White Balance For adjusting the color bal- AWB ance according to lighting. p.65 Resize For changing the image size. – p.110 Trimming For trimming the image. – p.
e04KB335_33e.qk 6/6/02 4:38 PM Page 34 (1,1) Taking Pictures Displaying Shooting Information (Display Mode) Display On Shooting information is displayed. q e t u 123 4 5 198 Flash mode w Shooting mode Focus mode r Capture mode AF frame y Remaining images Date & time i Battery symbol z 8 198 2048 AWB 6/10/2002 11:19 65 Taking Still Pictures in Auto Mode (Auto Mode) By setting the mode dial to , most of the settings will be made automatically by the camera when a picture is taken.
e04KB335_33e.qk 6/6/02 4:38 PM Page 36 (1,1) c z c Playing Back Images memo x Taking Pictures Manually (Manual Exposure Mode) You can set the shutter speed and aperture manually. z x Set the mode dial to Capture mode. in 198 Four-way controller ( ): Decrease the shutter speed Four-way controller ( ): Increase the shutter speed Four-way controller ( ): Decrease the aperture value Four-way controller ( ): Increase the aperture value 1/250 F2.6 6/10/2002 11:19 Aperture Shutter speed Caution p.
e04KB335_33e.qk 6/6/02 4:38 PM Page 38 (1,1) z x c x z( Taking Dark Scenes (Night-Scene Mode) Continuous Shooting Pictures are taken continuously while the shutter release button is pressed. z x z x Set the mode dial to in Capture mode. Press the shutter release button. The picture will be taken. p.21 Set the mode dial to in Capture mode. 198 6/10/2002 11:19 c As the shutter speed becomes slow in night-scene mode, camera shake should be avoided. Press the shutter release button.
e04KB335_33e.qk 6/6/02 4:38 PM Page 40 (1,1) ● Remote control unit battery service life Up to approximately 30,000 signals can be sent to the camera from the remote control unit. Contact your nearest Pentax service center when battery replacement becomes necessary. x z( ) Zoom on the remote controller The zoom can be changed using the remote control E (optional). If you press the Zoom button on the remote control unit, the zoom will switch from [Wide] to [Tele] to [Middle].
e04KB335_33e.qk 6/6/02 4:38 PM Page 42 (1,1) Keeping the shutter release button pressed z If you keep the shutter release button pressed for more than one second, pictures will be taken for as long as you keep the button pressed. Shooting stops when you take a finger off from the shutter release button. xc x Playing Back Movie Pictures Caution p.78 • The flash will not fire in Movie Picture mode. • Continuous shooting is not possible in Movie Picture mode.
e04KB335_33e.qk 6/6/02 4:39 PM Page 44 (1,1) Enabling/Disabling the Digital Zoom Function z z x c v Using the Zoom You can use the zoom to take pictures in Tele or Wide mode. z Press the Zoom button in Capture mode. Caution Press the Menu button. The [Rec.Mode] menu will be displayed. Press the four-way controller ( to select [Digital Zoom]. Use the four-way controller ( to select [On] or [Off]. ) Rec.Mode ) Press the Playback/OK button. The camera is ready to take a picture.
e04KB335_33e.qk 6/6/02 4:39 PM Page 46 (1,1) x z c z( ) n. x cv bm Taking Stereo Pictures (3D Image Mode) Using the Self-Timer The picture will be taken ten seconds after the shutter release button is pressed. z memo Press the or button to display in Capture on the LCD monitor. Press the shutter release button. The self-timer is started and the self-timer lamp lights. The picture will be taken approximately three seconds after the self-timer lamp starts to blink.
e04KB335_33e.qk 6/6/02 4:39 PM Page 48 (1,1) The image of the first picture is displayed to the left half screen of the LCD monitor, and the right half screen is for taking the second picture. m , . Move the camera to the right without changing your stance. Take the second picture while watching the capture guide. Hold the camera so that the subject is in the center of the right half screen, and press the shutter release button. Press the Playback/OK button.
e04KB335_33e.qk 6/6/02 4:39 PM Page 50 (1,1) ● How to view 3D pictures using the 3D image viewer ● Example of a 3D picture Print out the pictures so that they are about 11cm or 12cm wide and place the divider of the 3D image viewer in the middle of the two.
e04KB335_33e.qk 6/6/02 4:39 PM Page 52 (1,1) When you selected a color filter: z c c b x c (Selecting a color filter) (Selecting a slim filter) v When you selected the slim filter: c Taking Pictures with Digital Filters (Digital Filter Mode) Digital filters include the color filters and a slim filter which elongates the subject vertically or horizontally. 52 Set the Mode dial to in Capture mode. Use the four-way controller ( ter you want to use.
e04KB335_33e.qk 6/6/02 4:39 PM Page 54 (1,1) m button Mode dial Shutter release button Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) MENU Set the start time. 1. Press the four-way controller ( ). and will be displayed above and below the hour. Set-up 2. Use the four-way controller ( ) to set the hour and press the four-way controller ( ). and will be displayed above and below the minute.
e04KB335_33e.qk 6/6/02 4:39 PM Page 56 (1,1) Setting the Shooting Functions Mode dial Shutter release button Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) MENU Set-up z 2048×1536 AWB Multiple On Exit Viewfinder Ok OK Playback/OK button Shooting Time-lapse Movies (Time-lapse Movie) With the time-lapse movies, the frame rate (number of pictures taken for one second) is slowed down.
e04KB335_33e.qk 6/6/02 4:39 PM Page 58 (1,1) z Caution If you take a picture while looking through the viewfinder when the focus mode is set on Macro, the range of the resulting picture may differ from what was seen in the viewfinder. Manual Focus When the mode is set on , the center of the picture is enlarged to full screen on the LCD monitor. Adjust the focus with the fourway controller while looking at the image on the monitor.
e04KB335_33e.qk 6/6/02 4:39 PM Page 60 (1,1) Setting the position of the autofocus (AF) area When the mode is set on area can be changed. , the position of the autofocus (AF) The AF area moves upward. z The AF area moves downward. The AF area moves to the left. EV Compensation The AF area moves to the right. You can take pictures that are intentionally overexposed or underexposed. Press the Playback/OK button to determine the position of the AF area.
e04KB335_33e.qk 6/6/02 4:39 PM Page 62 (1,1) z Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) Playback/OK button MENU Set-up 2048×1536 AWB Multiple On Exit OK Ok Selecting the Flash Mode None Auto The flash discharges automatically depending on the light conditions. Flash Off The flash will not discharge. Flash On The flash discharges regardless of the brightness.
e04KB335_33e.qk 6/6/02 4:39 PM Page 64 (1,1) Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) MENU Playback/OK button Set-up AWB Multiple On Exit OK The quality is better and there is a high volume of image data. BETTER Standard level GOOD The quality is good and there is a low volume of image data. AWB Select [Quality Level] from the [Rec.Mode] menu. ) Rec.
e04KB335_33e.qk 6/6/02 4:39 PM Page 66 (1,1) Manual Setting z x c v Select [ ] (manual) on the white balance screen. Point your camera at a blank sheet of paper so that it fills the screen. Rec.Mode White Balance AWB Menu button DISPLAY Adjust Press the Display button. MENU Exit OK Ok Adjustment will start and [Adjusting] will appear on the LCD monitor. When adjustment has been completed, [Complete] will appear on the LCD monitor and the screen will return to the menu screen.
e04KB335_33e.qk 6/6/02 4:39 PM Page 68 (1,1) Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) Set-up AWB Multiple On Menu button Exit OK The exposure is determined by the entire screen. Center-weighted The exposure is determined mainly by the center of the screen. The exposure is determined by the middle of the screen only. Select [AE Metering] on the [Rec.Mode] menu.
e04KB335_33e.qk 6/6/02 4:39 PM Page 70 (1,1) Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) MENU Rec.Mode Set-up 2048×1536 AWB Multiple On Exit OK Menu button Four-way controller (1/3) Ok You can choose the Instant Review time from 0.5sec, 1sec, 2sec, 3sec, 4sec, 5sec or Off (no display). memo 70 OK Ok ) Rec.
e04KB335_33e.qk 6/6/02 4:39 PM Page 72 (1,1) Rec.Mode Menu button Four-way controller Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom (1/3) MENU Rec.Mode Set-up 2048×1536 AWB Multiple On Exit OK Menu button Four-way controller (1/3) Ok OK Ok Rec.Mode Memory Set-up Applied Photo Mode Parallel Mode Sharpness Saturation Contrast (3/3) MENU Exit OK Ok z x c Select [Contrast] on the [Rec.Mode] menu.
e04KB335_33e.qk 6/6/02 4:39 PM Page 74 (1,1) z Saving the Settings (Memory) x Press the Menu button in Capture mode. Rec.Mode Press the four-way controller ( ). [Memory] menu will be displayed. Saving the Menu Items (Mode Memory) (1/3) You can choose whether you want the set values to be saved when the camera is turned off. If you select (On), the settings will be saved in the status they were in immediately before the camera was turned off.
e05KB335_33e.qk 6/6/02 4:28 PM Page 76 (1,1) Playback/Erasing c Playing Back Images When the CF card is installed, the images recorded on the CF card are played back. When the CF card is not installed, the images recorded in the built-in memory are played back. Press the Playback/OK button to enter the playback mode. memo Caution Press the Playback/OK button. Zoom playback will end.
e05KB335_33e.qk 6/6/02 4:28 PM Page 78 (1,1) Displaying Shooting Information (Display Mode) You can display information on the LCD monitor when shooting. The information displayed can be changed by pressing the Display button. zxc Playing Back Movie Pictures You can play back Movie pictures. A guide to operation is displayed on the LCD monitor during playback. 1 23 Display On Information is displayed when shooting.
e05KB335_33e.qk 6/6/02 4:28 PM Page 80 (1,1) Erasing Images x x z c zc v Nine-image Display You can display nine images at the same time. z x memo 80 Enter the Playback mode and choose an image with the four-way controller ( ). z Press the button. Nine images will be displayed with the selected image in the center. Choose an image with the four-way controller ( ).
e05KB335_33e.qk 6/6/02 4:28 PM Page 82 (1,1) x z zc x c v Protecting Images from Deletion (Protect) Erasing All Images You can protect images from being accidentally erased. You can erase all the images at once. z • Once erased, images cannot be restored. • Protected images cannot be erased. • If the CF card is installed, only the images recorded on the CF card will be deleted. Caution z c memo Select [All Images] with the fourway controller ( ).
e05KB335_33e.qk 6/6/02 4:28 PM Page 84 (1,1) c Setting the Printing Service You can print the images on the CF card using a DPOF (Digital Print Order Format) compatible printer or at a printing service. v x memo zcv b Caution Printing Single Image Enter the Playback mode and choose the image for which you want to specify the number of prints with the fourway controller ( ). Press the DPOF button. The DPOF screen will be displayed.
e05KB335_33e.qk 6/6/02 4:28 PM Page 86 (1,1) Viewing Images with Windows PC z By using the provided USB cable (I-USB6) or card reader and image-browser software, you can transfer images recorded with the camera to a PC and edit them or print them out. This section explains how to view images on a PC using the provided USB driver and software. xcv b About the included software The included CD-ROM (S-SW5) contains the following software: - USB driver - Image viewing software (ACDSee™ 3.
e05KB335_33e.qk 6/6/02 4:28 PM Page 88 (1,1) Installing the software The procedures for installing the necessary software are explained. • The installation procedure varies depending on the version of Windows (98/98SE/Me/2000). Before starting installation, check which version of Windows you have on your PC. If you are using Windows XP, see “Installing the USB Driver (Windows XP)” (p.95) for installation instructions.
e05KB335_33e.qk 6/6/02 4:28 PM . ⁄0 ⁄1 Make sure that the [Win] folder is selected and click [Next]. Make sure that [penusbp.inf] is selected, then click [Next]. Installation starts. ● Windows Me b n m Click [Finish]. Installation is completed and the [Wizard] screen is closed. ⁄2 memo Select [Specify the location of the driver (Advanced)], and then click [Next]. Select [Specify a location], and then click [Browse]. If [Removable Media] has been selected, click the check box to unselect it.
e05KB335_33e.qk 6/6/02 4:28 PM ⁄0 ⁄1 ⁄2 Page 92 (1,1) Click [Finish]. Installation is completed and the [Wizard] screen is closed. Turn the camera off and restart your PC. When Windows is up and running, turn the camera on. ● Windows 2000 b n Double-click the [My Computer] icon on the desktop. When the camera is turned on, the Removable Disk icon appears in the window. m memo The CF card, if installed, is regarded as the removable disk.
e05KB335_33e.qk 6/6/02 4:28 PM ⁄0 ⁄1 ⁄2 ⁄3 Make sure that the [Win] folder containing the files to be copied is selected, and click [OK]. Make sure that [penusbp.inf] is selected, then click [Next]. Installation starts. Installing the USB driver (Windows XP) z x c Turn on your PC. Set the CD-ROM (S-SW5) supplied with the camera in the CD-ROM drive. Turn the camera off and connect the PC and camera using the USB cable. Click [Finish]. Installation is completed and the [Wizard] screen is closed.
e05KB335_33e.qk 6/6/02 4:28 PM n m Page 96 (1,1) When [The software has been successfully installed] message appears, click [Finish]. Installation is completed and the [Wizard] screen is closed. If the screen for choosing an automatic Windows operation is displayed, click [Cancel]. Click [My Computer] from [Start] menu. After installing the software, make sure that a Removable Disk has been added to [My Computer]. Installing ACDSee™ When installing ACDSee™, recorded images can be viewed on your PC.
e05KB335_33e.qk 6/6/02 4:28 PM Page 98 (1,1) Connecting the camera and PC z x Viewing images on your PC z x Turn on your PC. Turn the camera off and connect the PC and camera using an USB cable. memo c • The CF card, if installed, is regarded as the removable disk. If the CF card is not installed, the built-in memory is regarded as the removable disk. • Although images can be viewed and printed, image data is in the built-in memory or on the CF card in the camera.
e05KB335_33e.qk 6/6/02 4:28 PM Page 100 (1,1) Disconnecting your camera from your PC (Windows XP) Disconnecting the camera from your PC z Disconnecting the camera from your PC (Windows 2000) x z x c memo 100 Make sure [PENTAX USB Disk Device] is selected and click [Stop]. [Stop Hardware Device] screen will be displayed. Make sure [PENTAX USB Disk Device] is selected and click [OK]. A message will appear. Click [OK]. Disconnect the USB cable from your PC and camera.
e05KB335_33e.qk 6/6/02 4:28 PM Page 102 (1,1) Viewing Images with Macintosh Installing the software By using the provided USB cable (I-USB6) or card reader and image-browser software, you can transfer images recorded with the camera to a PC and edit them or print them out. This section explains how to view images on a PC using the provided USB driver and software. The procedures for installing the necessary software are explained. Installing the USB driver (Only for Mac OS 8.
e05KB335_33e.qk 6/6/02 4:28 PM Page 104 (1,1) Connecting the camera and your Macintosh z x Viewing images on your Macintosh z x c Turn on your Macintosh. Turn off the camera and connect your Macintosh and camera using an USB cable. memo Double click the [ACDSee™] folder on the hard drive. Double click the [ACDSee™] program icon. Choose an image you wish to view. Camera images can be found in the [untitled] ➝ [DCIM] ➝ [xxxPENTX] (xxx is a 3-digit numeral) folder on the desktop.
e06KB335_33e.qk 6/6/02 4:40 PM Page 106 (1,1) Editing Images/Settings Editing Images How to recall the [Set-up] menu Rec.Mode Menu button Four-way controller Playback/OK button Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom (1/3) MENU Set-up Rec.Mode Twice 2048×1536 AWB Multiple On Exit OK (1/3) Ok Images can be copied between the built-in memory and the CF card and vice versa. z x All images saved in the built-in memory are copied to the CF card.
e06KB335_33e.qk 6/6/02 4:40 PM Page 108 (1,1) How to recall the [Set-up] menu Rec.Mode Memory Rec.Mode Set-up Twice Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) Playback/OK button MENU 2048×1536 AWB Multiple On Exit OK If the built-in memory space is insufficient, [Built-in Memory Full. Cannot Copy] appears on the LCD monitor. Format the built-in memory, or erase unnecessary images.
e06KB335_33e.qk 6/6/02 4:40 PM Page 110 (1,1) How to recall the [Set-up] menu Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) Playback/OK button MENU Rec.Mode Set-up Twice 2048×1536 AWB Multiple On Exit OK (1/3) Ok m Changing the Image Size (Resize) The recorded pixels and quality of the selected image can be altered to change the file to a smaller size.
e06KB335_33e.qk 6/6/02 4:40 PM Page 112 (1,1) Camera Settings How to recall the [Set-up] menu Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) Playback/OK button MENU Set-up 2048×1536 AWB Multiple On Exit OK • Do not open the CF card cover while the card is being formatted. The card may be damaged and become unusable. • Formatting will delete protected data too.
e06KB335_33e.qk 6/6/02 4:40 PM Page 114 (1,1) How to recall the [Set-up] menu Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) Playback/OK button MENU Set-up Exit OK Press the four-way controller ( The alarm list will be displayed. Off On Exit OK Ok ). Alarm 1 Everyday 18:00 2 Once 11:00 3 Off 00:00 Use the four-way controller ( Press the four-way controller ( ).
e06KB335_33e.qk 6/6/02 4:40 PM Page 116 (1,1) How to recall the [Set-up] menu Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) Playback/OK button MENU Exit OK b n memo MENU Set-up Rec.
e06KB335_33e.qk 6/6/02 4:40 PM Page 118 (1,1) How to recall the [Set-up] menu Rec.Mode Menu button Four-way controller Playback/OK button Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom (1/3) MENU Rec.Mode Set-up Twice 2048×1536 AWB Multiple On Exit OK (1/3) Ok n Setting the World Time The city and time selected in “Initial Settings” (p.16) serve as the World Time setting.
e06KB335_33e.qk 6/6/02 4:40 PM Page 120 (1,1) How to recall the [Set-up] menu Rec.Mode Menu button Four-way controller Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom (1/3) MENU Playback/OK button Set-up 2048×1536 AWB Multiple On Exit OK You can set the LCD monitor to turn off automatically when no operation is performed for a fixed time. c Select [Sleep Timeout] on the [Set-up] menu. Use the four-way controller ( [1min], [2min] or [Off].
e06KB335_33e.qk 6/6/02 4:40 PM Page 122 (1,1) How to recall the [Set-up] menu Rec.Mode Memory Recorded Pixels Quality Level White Balance Focusing Area Digital Zoom Menu button Four-way controller (1/3) MENU Playback/OK button Rec.Mode Set-up 2048×1536 AWB Multiple On Exit OK Ok Twice Memory Format Copy Image Resize Trimming Alarm Beep (1/3) MENU Set-up Rec.
e07KB335_33e.qk 6/6/02 4:29 PM Page 124 (1,1) Appendix Messages List of City Names Refer to the following list of city and code names for setting the world time.
e07KB335_33e.qk 6/6/02 4:29 PM Page 126 (1,1) This card is not formatted. The card you have inserted is unformatted or has been formatted on a PC or other device. (p.112) Image recording... The image is being recorded. DPOF settings recording The DPOF settings are being recorded on the CF card. Movie recording... Problem Cause Remedy Battery is not installed Check battery is installed. If not, install battery. The movie picture is being recorded. CF card cover is open Close CF card cover.
e07KB335_33e.qk 6/6/02 4:29 PM Problem Page 128 (1,1) Cause Remedy Problem Subject is not in Subject difficult to focus Subjects difficult to focus on on focus using autofocus: objects with little contrast (blue sky, white walls, etc.), dark objects, finely patterned objects, fastmoving objects, scenery through window or net, etc. Lock focus on another object located at same distance (press shutter release button halfway), then aim at target and press shutter release button fully.
e07KB335_33e.qk 6/6/02 4:29 PM Page 130 (1,1) Main Specifications Type Compact-type digital still camera with built-in zoom lens, autofocus, auto exposure and auto flash. Effective pixels 4.0 megapixel (430RS), 3.2 megapixel (330RS) Sensor Total pixels – 4.13 megapixel (Optio 430RS), 3.34 megapixel (Optio 330RS) 1/1.8 inch interline transfer CCD with a primary color filter. Color Depth 10 bit × 3 colors.
e07KB335_33e.qk 6/6/02 4:29 PM Page 132 (1,1) Optional Accessories A number of dedicated accessories are available for this camera.
e07KB335_33e.qk 6/6/02 4:29 PM Page 134 (1,1) For customers in the USA STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
e07KB335_33e.qk 6/6/02 4:29 PM Page 136 (1,1) Asahi Optical Co., Ltd. 2-36-9, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pentax.co.jp) Pentax GmbH (European Headquarters) Julius-Vosseler-Strasse 104, 22527 Hamburg, GERMANY (HQ - http://www.pentaxeurope.com) (Germany - http://www.pentax.de) Pentax U.K. Limited Pentax House, Heron drive, Langley, Slough, Berks SL3 8PN, U.K. (http://www.pentax.co.uk) Pentax France S.A.
