Operating Manual

ADVANCED OPERATIONS

To set

1. Set the exposure compensation dial to [D]. [D] will be displayed on the LCD panel.

2. Press the up/down button repeatedly until [on] appears on the LCD panel.

If i is displayed on the LCD panel, the exposure data will be imprinted on the negative.

• With a 645 A- lens attached, the focal length of the lens will not be imprinted even if i is displayed on the

LCD panel.

• With an accessory without the lens information contacts such as a helicoid extension tube attached, the

focal length and aperture setting of the lens will not be imprinted even if i is displayed on the LCD panel.

• Since the exposure data are imprinted on the outside of picture frame, the data will not be seen on the

actual photographs.

• The shutter cannot be released with the exposure compensation dial set to i.

1 2