AF540FGZ_OPM_ENG.book Page 0 Friday, January 14, 2011 12:44 PM AUTO ZOOM ELECTRONIC FLASH UNIT OPERATING MANUAL Please read this operating manual carefully first for proper use.
AF540FGZ_OPM_ENG.book Page 0 Friday, January 14, 2011 12:44 PM Thank you for purchasing the PENTAX Auto-flash AF540FGZ. In addition to easy daylight sync photography with TTL auto, the AF540FGZ also allows wireless TTL auto (P-TTL auto) photography and high-speed sync. It is a clip-on type flash which enables accurate focus adjustments even in dark locations with built-in AF-assist spotbeam. PENTAX is a trademark of HOYA CORPORATION.
AF540FGZ_OPM_ENG.book Page 1 Friday, January 14, 2011 12:44 PM FOR THE SAFE USE OF YOUR FLASH UNIT Although we have carefully designed this flash unit for safe operation, please be sure to follow precautions given on page 2. WARNING This symbol indicates that violating this item could cause serious personal injuries. CAUTION This symbol indicates that violating this item could cause minor or medium personal injuries, or loss of property. is a symbol indicating items that are prohibited.
AF540FGZ_OPM_ENG.book Page 2 Friday, January 14, 2011 12:44 PM WARNING CAUTION The flash contains electronic circuits that operate at high voltages. Do not attempt to disassemble the flash unit yourself, as there is danger of an electric shock. Do not use the flash near a person's eyes, as it may hurt them. Be particularly careful when using the flash around infants. If internal parts of the flash unit become exposed due to impact, etc., do not touch them as there is danger of an electric shock.
AF540FGZ_OPM_ENG.book Page 3 Friday, January 14, 2011 12:44 PM Precautions for Your Flash Unit ● Never use organic solvents such as paint thinner, alcohol or benzine to clean the flash unit. ● Avoid leaving the flash unit for extended period in places where the humidity and temperature are very high such as in a car. ● Be careful not to subject the flash unit to strong vibrations, shock or pressure. Use a cushion to protect the flash unit when carrying it in a motorcycle, car, boat, etc.
AF540FGZ_OPM_ENG.book Page 4 Friday, January 14, 2011 12:44 PM ■Cautions Regarding Batteries ● This flash unit uses four AA alkaline, lithium, or nickel metal hydride batteries. Do not use any other types of batteries. The flash unit may not be able to operate correctly or demonstrate sufficient performance, or the flash unit itself may generate heat, depending on the type of batteries used. ● AA alkaline and lithium batteries themselves are not rechargeable. Also, do not dismantle the batteries.
AF540FGZ_OPM_ENG.book Page 5 Friday, January 14, 2011 12:44 PM Contents FOR THE SAFE USE OF YOUR FLASH UNIT ................................................................. 1 Precautions for Your Flash Unit ....................... 3 Cautions Regarding Batteries ............................. 4 Names of Parts ................................................... 6 Major bundled items ........................................... 9 LCD Panel Indicator..........................................
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.book Page 9 Friday, January 14, 2011 12:44 PM ■Major bundled items Stand Opening of the stand Case Operating manual (this manual) Certification Slide the hot shoe bracket into the opening of the stand. ● You cannot attach the off-camera shoe adapter F to the bundled stand. ● When attaching the flash unit to the stand, do not tighten the locking lever too far.
AF540FGZ_OPM_ENG.book Page 10 Friday, January 14, 2011 12:44 PM ■LCD Panel Indicator Zoom indicator Format indicator : A.Zoom ➝ M.Zoom xxmm = 20, 24, 28, 35, 50, 70, 85 (35 mm format) 35, 45, 55, 70, 100, 135, 150 (645 format) 55, 60, 70, 90, 120, 180, 190 (67 format) 13, 16, 19, 24, 34, 48, 58 (DIGITAL camera (K series, *ist D series)) 25, 30, 35, 43, 62, 87, 106 (645D) : 35mm ➝ 645 ➝ 67 ➝ DIGITAL Flash mode indicator Flash output compensation indicator : P-TTL ➝ A ➝ M ➝ SB : -3.0 to +1.
AF540FGZ_OPM_ENG.book Page 11 Friday, January 14, 2011 12:44 PM > @ When in poorly lit locations and the LCD panel cannot be seen, pressing the LCD panel illumination button (LIGHT) will illuminate the panel for about 10 seconds. Pressing it again will turn off the illumination. ● The camera's LCD panel lights up also when you press the LCD illumination button (LIGHT) and the exposure metering timer is on for the following camera.
AF540FGZ_OPM_ENG.book Page 12 Friday, January 14, 2011 12:44 PM Inserting the Batteries 1 12 Slide the battery chamber cover as shown in the figure to open. 2 Insert four AA batteries, making sure the plus/ minus markings (+, -) match the diagram inside the battery chamber cover.
AF540FGZ_OPM_ENG.book Page 13 Friday, January 14, 2011 12:44 PM Types of Batteries This flash unit uses four AA batteries of the same type, as shown below. - Alkaline battery (LR6) - Lithium battery (FR6) - Nickel-Metal Hydride battery (Ni-MH) (Nickel manganese (Ni-Mn) and nickel cadmium (NiCd) batteries cannot be used.) ● For information about recycling times and total number of flashes, refer to “Specifications” on page 88.
AF540FGZ_OPM_ENG.book Page 14 Friday, January 14, 2011 12:44 PM Mounting to Camera 1 1 2 14 2 Remove the hot shoe cover from the camera. Attach the flash unit to the camera. Turn the locking lever of the flash unit in the direction opposite to that indicated by (FIX➝) (clockwise from the direction of the LCD panel). Slide the hot shoe foot of the flash unit into the camera's hot shoe from the back of the camera forward.
AF540FGZ_OPM_ENG.book Page 15 Friday, January 14, 2011 12:44 PM Turning the Power On Sliding the power switch to the (ON) position will turn on the power. The ready lamp will light up when the flash is charged. Sliding it to the (OFF) position will turn off the power. If charging time takes more than 20 seconds, the batteries have been exhausted and should be replaced with new batteries. If the flash unit is used with exhausted batteries, the settings may return to their default configuration.
AF540FGZ_OPM_ENG.book Page 16 Friday, January 14, 2011 12:44 PM ■Charging the AF540FGZ with the Optional External Power Source 1 2 3 Prepare the external power source TR Power Pack-3 in accordance with the instruction in the operating manual. Confirm that the power switch of the flash unit and TR Power Pack-3 is turned to OFF. Then, plug the power cord into the external power socket on the flash unit. Turn the power switch of the external power source and the power switch of the flash unit to ON.
AF540FGZ_OPM_ENG.book Page 17 Friday, January 14, 2011 12:44 PM ■Auto Power Off Function ■Quick Power On Function When the flash unit is left unused for about 3 minutes with the power switch set to the (ON) position, it automatically switches off to save the power. If the flash unit is mounted on autofocus cameras, press the shutter release button half way to turn on the power.
AF540FGZ_OPM_ENG.book Page 18 Friday, January 14, 2011 12:44 PM Select Button (S)/Adjustment Dial Functions 4 types of settings are available as shown on the following pages for the select button (S) and the adjustment dial. ■Procedure 1 18 Press the select button (S) so that the number to adjust is blinking. 2 Turn the adjustment dial and adjust the blinking number.
AF540FGZ_OPM_ENG.book Page 19 Friday, January 14, 2011 12:44 PM 3 After adjustment, press the select button (S) and stop the blinking. Adjust the other items below using the same procedure. ● When using multiple flash units set to P-TTL or TTL Auto and adjusting the amount of light at the same time, use the camera’s exposure compensation. Connected Flash Mode Adjustment Range Flash output compensation P-TTL Auto flash ISO / F (aperture) setting Auto flash (A) -3.0 to +1.0 levels (EV) (0.
AF540FGZ_OPM_ENG.book Page 20 Friday, January 14, 2011 12:44 PM Camera Format and Flash Coverage Angle The AF540FGZ’s flash coverage angle can be adjusted to match the angle of view of the lens being used, which enables effective distribution of the flash light. The flash coverage angle is indicated by the focal lengths of available lenses in the LCD panel of the flash unit, according to the preset image size (FORMAT) of the camera.
AF540FGZ_OPM_ENG.book Page 21 Friday, January 14, 2011 12:44 PM the focal length of the lens by pressing the shutter release button of the camera halfway down. The auto zoom function operates while the exposure metering timer is operating (while information is being displayed in the viewfinder). If you are setting the format manually, return the setting switch to the upper (white dot) position. When (M.Zoom) is displayed on the LCD panel, press the zoom button (ZOOM) repeatedly until (A.
AF540FGZ_OPM_ENG.book Page 22 Friday, January 14, 2011 12:44 PM ● In the manual zoom mode, refer to the LCD panel and set it so the flash coverage angle matches the lens focal length or set a flash coverage angle that is shorter than the lens focal length.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.book Page 24 Friday, January 14, 2011 12:44 PM ● In the (A.Zoom) mode, the flash coverage angle will be adjusted automatically to suit the lens focal length when you press the shutter release button halfway, and the camera exposure metering timer is on. ● A warning signal appears as follows when the flash cannot cover the focal length of the camera. - The zoom indicator blinks for the combination of the following camera and lenses.
AF540FGZ_OPM_ENG.book Page 25 Friday, January 14, 2011 12:44 PM Using the Flash Modes The AF540FGZ has the following flash modes. Select the mode best suited for the subject. Before photographing, confirm the following. 1. Whether your camera supports the desired flash mode. ➝ Cameras that Support Each Flash Mode (page 60) 2. Whether you can use the desired function with the combination of your camera and the flash mode you have set.
AF540FGZ_OPM_ENG.book Page 26 Friday, January 14, 2011 12:44 PM 3 ■P-TTL Auto Flash Set the sync mode switch to leading curtain sync ( ), trailing curtain sync ( ), or contrast-control ( ), according to the subject. (Refer to page 32.) ● After turning the power (ON), the setting will be (P-TTL) and (A.Zoom). Effective flash range 4 Refer to page 25 for the features and conditions of use of this flash mode. Procedure 1 2 26 Turn on the flash unit.
AF540FGZ_OPM_ENG.book Page 27 Friday, January 14, 2011 12:44 PM ■TTL Auto Flash Procedure Refer to page 25 for the features and conditions of use of this flash mode. 1 2 3 4 5 Turn on the flash unit. Press the flash mode button (MODE) until (TTL) is displayed on the LCD panel. Set the sync mode switch to leading curtain sync ( ), trailing curtain sync ( ), or contrast-control ( ), according to the subject. (Refer to page 32.) Set the zoom position.
AF540FGZ_OPM_ENG.book Page 28 Friday, January 14, 2011 12:44 PM ■Auto Flash Refer to page 25 for the features and conditions of use of this flash mode.
AF540FGZ_OPM_ENG.book Page 29 Friday, January 14, 2011 12:44 PM Procedure 1 2 3 Turn on the power switch. Press the flash mode button (MODE) until (A) is displayed on the LCD panel. Set the aperture value and ISO. Press the select button (S) so that (F/stop) on the LCD panel blinks. Turn the adjustment dial to set the aperture value. ● The effective flash range is displayed on the LCD panel bar graph. Confirm that the subject is within the effective flash range and press the select button (S).
AF540FGZ_OPM_ENG.book Page 30 Friday, January 14, 2011 12:44 PM ■Manual Flash Procedure Refer to page 25 for the features and conditions of use of this flash mode. 1 2 Turn on the power switch. Press the flash mode button (MODE) to display (M) (1/xx) on the LCD panel. ● You can set the flash output from 1/1 to 1/64. See page 18. 3 4 Set the zoom position. (The setting method differs according to your camera and lens. Refer to page 21.
AF540FGZ_OPM_ENG.book Page 31 Friday, January 14, 2011 12:44 PM 5 Confirm that the subject is within the effective flash range and the ready lamp is lit. Then take a picture. ● In the following cameras, if the correct flash output is obtained, the flash mode indicator and ( ) in the viewfinder will blink. 645, LX, MZ-M/ZX-M For details, refer to “Auto Check Display” on page 11.
AF540FGZ_OPM_ENG.book Page 32 Friday, January 14, 2011 12:44 PM Using the Sync Mode The AF540FGZ has the following sync modes. Select the mode best suited for the subject. Before photographing, confirm the following. 1. Whether your camera supports the desired sync mode. ➝ Cameras that Support Each Sync Mode (page 62) 2. Whether you can use the desired sync mode with the combination of your camera and the flash mode you have set. ➝Functions Related to Each Flash Mode (page 64 - 71) 3.
AF540FGZ_OPM_ENG.book Page 33 Friday, January 14, 2011 12:44 PM ■Leading Curtain Sync Mode ■Trailing Curtain Sync Mode Refer to page 32 for the features and conditions of use of this sync mode. Refer to page 32 for the features and conditions of use of this sync mode. Procedure 1 2 3 Set the power switch to the (ON) position. Set the sync mode switch to leading curtain sync ( ). Confirm that the subject is within the effective flash range and the ready lamp is lit. Then take a picture.
AF540FGZ_OPM_ENG.book Page 34 Friday, January 14, 2011 12:44 PM ■High-Speed Sync Mode Procedure Refer to page 32 for the features and conditions of use of this sync mode. ● As can be seen in the table on page 84, as the shutter speed becomes faster, the guide number becomes smaller. Accordingly, it should be noted that the distance for taking pictures would become shorter. 1 2 3 34 Attach the flash unit to the camera’s hot shoe and turn it on.
AF540FGZ_OPM_ENG.book Page 35 Friday, January 14, 2011 12:44 PM 6 7 Check the flash range by looking at the bar graph on the LCD panel. Confirm that the subject is within the effective flash range and the ready lamp is lit. Then take a picture. ● Please read the camera operating manual for camera operation. ● High-speed sync is possible with the camera separated (wireless) from the AF540GZ. (Refer to page 46.
AF540FGZ_OPM_ENG.book Page 36 Friday, January 14, 2011 12:44 PM ■Contrast Control Sync Flash Procedure Refer to page 32 for the features and conditions of use of this sync mode. ● Refer to “Connecting the AF540FGZ with the Extension Cord” on page 59 on using the AF540FGZ detached from the camera. 36 1 2 3 Turn on the power switch. Set the sync mode switch to contrast-control ( ). Set the zoom position. (The setting method differs according to your camera and lens. Refer to page 21.
AF540FGZ_OPM_ENG.book Page 37 Friday, January 14, 2011 12:44 PM With a single flash With contrast control sync flash ● If you are using a single flash unit, you can only perform leading curtain sync photography when the sync mode switch is set to contrast-control ( ).
AF540FGZ_OPM_ENG.book Page 38 Friday, January 14, 2011 12:44 PM Advanced Functions ■Wireless Mode With the AF540FGZ, you can take photographs with the flash unit separated from the camera wirelessly in P-TTL mode. Combine the flash unit with the built-in flash unit of the camera or another AF540FGZ attached to the camera. ● The AF360FGZ can be used interchangeably with AF540FGZ flash units for wireless mode photography. Before photographing, confirm the following. 1.
AF540FGZ_OPM_ENG.book Page 39 Friday, January 14, 2011 12:44 PM ● Control Flash and Main Flash The purpose of the control flash of the wireless mode is to send information to the other flash unit before taking a picture. The main flash discharges at the actual time a picture is taken in the same manner as traditionally done.
AF540FGZ_OPM_ENG.book Page 40 Friday, January 14, 2011 12:44 PM Using the AF540FGZ in Combination with a Built-in Flash Unit Setting switch ● The AF540FGZ can be used in combination with a built-in flash unit only when used with the following cameras. *ist D, *ist, MZ-S, MZ-L/ZX-L/MZ-6, K series (except K100D, K110D and K100D Super) (NOTE) K10D requires the firmware to be updated to Version 1.10 or later. Download the firmware for the K10D from the following URL, and install it on your camera.
AF540FGZ_OPM_ENG.book Page 41 Friday, January 14, 2011 12:44 PM 1 Firstly, set the wireless mode and channel of the AF540FGZ, and register them on the camera. Turn the camera off and then attach the AF540FGZ to the hot shoe of the camera. Set the power switch of the flash unit to (WIRELESS). Press the wireless mode button (M/C/S) the number of times required to display SLAVE on the LCD panel.
AF540FGZ_OPM_ENG.book Page 42 Friday, January 14, 2011 12:44 PM When Attaching the AF540FGZ to the Camera for Control Flash Main flash Control flash only: not used for main flash (Preparation of Flash Unit Attached to Camera) 1 42 Firstly, set the wireless mode and channel of the flash unit attached to the camera, and register them on the camera. Attach the AF540FGZ to the hot shoe of the camera after turning the camera off. Set the power switch of the flash unit to (WIRELESS).
AF540FGZ_OPM_ENG.book Page 43 Friday, January 14, 2011 12:44 PM When you turn the camera on and press the shutter release button halfway down, the channel of the flash unit is registered on the camera. (Preparation of Separated Flash Unit) 2 Next, set the channel of the separated (wireless) flash unit to the same channel as the flash unit attached to the camera. Place the other AF540FGZ in the desired position. Set the power switch of the flash unit to (WIRELESS).
AF540FGZ_OPM_ENG.book Page 44 Friday, January 14, 2011 12:44 PM When Using Both an AF540FGZ Attached to the Camera and a Separated Flash Unit as Main Flashes Use both flash units as main flashes (Preparation of Flash Unit Attached to Camera) 1 44 Firstly, set the wireless mode and channel of the flash unit attached to the camera, and register them on the camera. Attach the AF540FGZ to the hot shoe of the camera after turning the camera off. Set the power switch of the flash unit to (WIRELESS).
AF540FGZ_OPM_ENG.book Page 45 Friday, January 14, 2011 12:44 PM Slide the setting switch back up to the (white dot). When you turn the camera on and press the shutter release button halfway down, the channel of the flash unit is registered on the camera. (Preparation of Separated Flash Unit) 2 Next, set the channel of the separated (wireless) flash unit to the same channel as the flash unit attached to the camera. Place the other AF540FGZ in the desired position.
AF540FGZ_OPM_ENG.book Page 46 Friday, January 14, 2011 12:44 PM Wireless High-Speed Sync Photography (Using the AF540FGZ in Combination with a Built-in Flash Unit) 1 46 Firstly, set the wireless mode and channel of the AF540FGZ, and register them on the camera. Turn the camera off and then attach the AF540FGZ to the hot shoe of the camera. Set the power switch of the flash unit to (WIRELESS). Press the wireless mode button (M/C/S) the number of times required to display SLAVE on the LCD panel.
AF540FGZ_OPM_ENG.book Page 47 Friday, January 14, 2011 12:44 PM 2 When you turn the camera on and press the shutter release button halfway down, the channel is registered on the camera. Next, remove the flash unit from the camera and place it in the desired position. ● Press the flash mode button (MODE) to display (P-TTL) if the flash mode was set to the modes other than P-TTL. 3 Set the zoom position. (Refer to page 21) ● Set the zoom position with (M.Zoom) regardless of the lens you use.
AF540FGZ_OPM_ENG.book Page 48 Friday, January 14, 2011 12:44 PM (Using the AF540FGZ in Combination with another AF540FGZ) 1 48 Firstly, set the wireless mode and channel of the AF540FGZ attached to the camera, and register the channel on the camera. Turn the camera off and then attach the AF540FGZ to the hot shoe of the camera. Set the power switch of the flash unit to (WIRELESS). Press the wireless mode button (M/C/S) the number of times required to select CONTROL or MASTER.
AF540FGZ_OPM_ENG.book Page 49 Friday, January 14, 2011 12:44 PM 2 Slide the setting switch back up to the (white dot). When you turn the camera on and press the shutter release button halfway down, the channel is registered on the camera. Next, set the channel of the separated (wireless) flash unit to the same channel as the flash unit attached to the camera. Place the other AF540FGZ in the desired position. Set the power switch of the flash unit to (WIRELESS).
AF540FGZ_OPM_ENG.book Page 50 Friday, January 14, 2011 12:44 PM ■Slave With the AF540FGZ, you can take photographs with the flash unit separated from the camera wirelessly in auto or manual mode. Combine the flash unit with the built-in flash unit of the camera or another flash unit attached to the camera. Before photographing, confirm the following. 1. Whether you can use this function with the combination of your camera and the flash mode you have set.
AF540FGZ_OPM_ENG.book Page 51 Friday, January 14, 2011 12:44 PM 5 Set the zoom position to suit the subject and place the flash unit at the desired location. ● When setting up a flash unit separately from the camera, use the off-camera shoe adapter F when using a tripod, or the off-camera shoe clip CL-10 when setting up in another location such as tabletop, chair, etc. 6 ● Do not use red-eye reduction with the camera’s flash. This will result in the AF540FGZ firing by the pre-flash.
AF540FGZ_OPM_ENG.book Page 52 Friday, January 14, 2011 12:44 PM ■Slave Mode Setting To properly control the slave flash, it is necessary to set the slave mode settings. 2 seconds or more Procedure 1 2 3 Slide the setting switch up. Press the LCD panel illumination button (LIGHT) for 2 seconds or more. SL1 will be displayed. Press the select button (S) to select SL 1 or SL 2.
AF540FGZ_OPM_ENG.book Page 53 Friday, January 14, 2011 12:44 PM ■Slow-Speed Sync Photography When using a normal flash to photograph a subject in a night or evening setting, the background will appear very dark because a normal flash light cannot sufficiently light it. However, it is possible to balance both subject and background by using the flash to properly expose the foreground subject and a slow shutter speed to expose the low light background. Before photographing, confirm the following. 1.
AF540FGZ_OPM_ENG.book Page 54 Friday, January 14, 2011 12:44 PM ■Bounce Flash The bounce angle can be set to the following angles. With the AF540FGZ, you can tilt and swivel the flash head to aim at the ceiling or wall to bounce the flash before it reaches the subject. Doing so creates softer light and shadows to make the picture look more natural. Bouncing the flash will decrease the flash intensity by the time it reaches the subject.
AF540FGZ_OPM_ENG.book Page 55 Friday, January 14, 2011 12:44 PM ● A click stop is provided for each bounce angle. ● Hold the bounce lock release button and tilt the flash head downward when you set the bounce angle at -10°. ● When using bounce flash, ( ) will be displayed on the LCD panel. ● The effective flash range will blink only when the bounce angle is set at -10°. ● It is recommended to set the bounce angle at -10° to prevent uneven exposure when the distance to the subject is within 1m.
AF540FGZ_OPM_ENG.book Page 56 Friday, January 14, 2011 12:44 PM ■AF Spotbeam The AF540FGZ features a built-in red spotbeam projector to assist the autofocus system in dim light and low-contrast conditions. When using the flash with autofocus camera in dark conditions, the spotbeam will be projected automatically depending on the ambient lighting conditions. This function is activated only when the camera is set to autofocus.
AF540FGZ_OPM_ENG.book Page 57 Friday, January 14, 2011 12:44 PM ■Wide-Angle Panel and Catchlight Panel The AF540FGZ has a built-in wide-angle panel and catchlight panel at the top of the flash head. Execute the following if necessary. 1 2 Pull out both the wide-angle panel and catchlight panel. Store the panel you are not using. . ● When storing the wide-angle panel, push it inward while holding the catchlight panel so that it does not catch on the catchlight panel.
AF540FGZ_OPM_ENG.book Page 58 Friday, January 14, 2011 12:44 PM ■Modeling Flash/Test Flash Before taking the picture, firing a modeling flash helps you to see how shadows are cast on the subject. Modeling Flash 1 2 3 Slide the setting switch down (yellow dot). Check that the flash is ready, then press the modeling button (MODELING). The flash will discharge continuously for one second. After firing the modeling flash, slide the setting switch up (white dot).
AF540FGZ_OPM_ENG.book Page 59 Friday, January 14, 2011 12:44 PM ■Connecting the AF540FGZ with the Extension Cord When using the AF540FGZ separately from the camera connected by an extension cord, use the optional extension cord F5P/F5P L. Attach the extension cord F5P/F5P L to the camera using the optional hot shoe adapter FG or the optional hot shoe adapter F (refer to the diagram on the right).
AF540FGZ_OPM_ENG.book Page 60 Friday, January 14, 2011 12:44 PM Supported Functions for PENTAX Cameras ■Cameras that Support Each Flash Mode Cameras that support each of the flash modes are listed below. Please note that functions related to each flash mode differ. Refer to "Functions Related to Each Flash Mode" (page 64 - 71).
AF540FGZ_OPM_ENG.book Page 61 Friday, January 14, 2011 12:44 PM Flash Mode TTL Auto Flash (TTL) Camera Notes 672 - In trailing curtain sync or contrast control sync mode, the flash mode will automatically be switched to (TTL) when you press the shutter release button halfway down, even if you have set it to manual (M).
AF540FGZ_OPM_ENG.book Page 62 Friday, January 14, 2011 12:44 PM ■Cameras that Support Each Sync Mode Cameras that support each of the sync modes are listed below. Please note that the conditions under which they can be used differ depending on camera type and settings. For details, refer to the restrictions reference pages.
AF540FGZ_OPM_ENG.book Page 63 Friday, January 14, 2011 12:44 PM ■Cameras that Support Wireless Mode Function Wireless Mode ( ) Camera Notes Digital single lens reflex cameras 645D, K series (NOTE), *ist D series Film cameras (35mm autofocus single lens reflex cameras) *ist, MZ-S, MZ-L/ ZX-L/MZ-6 - When photographing in wireless mode, set the slave mode to SL1 (refer to page 52). - You cannot photograph in wireless mode in combination with the built-in flash unit with the following cameras.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.book Page 65 Friday, January 14, 2011 12:44 PM 1.
AF540FGZ_OPM_ENG.book Page 66 Friday, January 14, 2011 12:44 PM 2.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.book Page 69 Friday, January 14, 2011 12:44 PM 3.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.book Page 72 Friday, January 14, 2011 12:44 PM ■Sync Mode Restrictions Leading Curtain Sync Photography ( ) This sync mode can be used with all PENTAX single lens reflex cameras provided with a hot shoe. However, there are restrictions depending on camera type and settings.
AF540FGZ_OPM_ENG.book Page 73 Friday, January 14, 2011 12:44 PM Camera Category Camera Model Film cameras 645N2, 645N (medium format) MZ-S Film cameras (35mm autofocus Z-1/PZ-1, Z-5, Z-1P/PZ-1P, Z-5P single lens reflex) Z-10/PZ-10 SFXN/SF1N, SFX/SF1, SF7/SF10 35mm autofocus single lens reflex cameras other than those above Shutter Speed 1/45 sec. fixed (in Programmed AE and Aperture Priority AE) 1/45 sec. or slower (in Shutter Priority AE and manual exposure) 1/90 sec. or slower 1/125 sec.
AF540FGZ_OPM_ENG.book Page 74 Friday, January 14, 2011 12:44 PM Contrast Control Sync Photography ( ) Flash units that support this sync mode are as follows. However, the flash modes, cameras, and camera shutter speeds that can be used differ depending on the flash unit. Set the shutter speed to the speed shown in the shutter speed column below.
AF540FGZ_OPM_ENG.book Page 75 Friday, January 14, 2011 12:44 PM Camera Category Film cameras (medium format) Camera Model 645N2, 645N Shutter Speed 1/45 sec. fixed (in Programmed AE and Aperture Priority AE) 1/45 sec. or slower (in Shutter Priority AE and manual exposure) Film cameras (35mm autofocus single lens reflex cameras) Z-1/PZ-1, Z-1P/PZ-1P, Z-5, Z-5P 1/60 sec. fixed (in Programmed AE and Aperture Priority AE in Hyper Program)*1 1/60 sec.
AF540FGZ_OPM_ENG.book Page 76 Friday, January 14, 2011 12:44 PM High-Speed Sync Mode Photography ( ) Cameras that support this sync mode are as follows. Be sure to set your camera according to the following settings: - Shutter speed: faster than flash unit's X-sync speed - Exposure mode: Tv (Shutter Priority), Av (Aperture Priority), M (manual) Exposure modes other than the above are not compatible with this sync mode. Refer to the Exposure Modes Not Supported by High-Speed Sync Mode column.
AF540FGZ_OPM_ENG.book Page 77 Friday, January 14, 2011 12:44 PM Slow-Speed Sync Photography Restrictions Be sure to set the camera as follows. - Shutter speed: slower than flash unit's X-sync speed - Exposure mode: manual exposure, Shutter Priority AE, (except 645, SFXN/SF1N, SFX/SF1 and SF 7/SF10), B (Bulb Exposure) Exposure modes other than the above are not compatible with this photographic method. Refer to the Exposure Modes Not Supported by Slow-Speed Sync Photography column.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.book Page 80 Friday, January 14, 2011 12:44 PM Flash Effective Range ■Calculating the Flash Effective Range When setting the lens to manual F/stop, calculate the guide number at full flash with the use of flash's zoom position and ISO. Divide the resulting guide number by the aperture in use. Thus, the maximum distance is obtained. The minimum distance is obtained in dividing this max. distance by approx. 10. However, if the minimum distance obtained is 0.
AF540FGZ_OPM_ENG.book Page 81 Friday, January 14, 2011 12:44 PM Display of Flash Effective Range Effective flash range indicator The shooting distance parameters will be displayed on the LCD panel. Make sure that you are within the flash effective range before taking pictures. ● The effective flash range is displayed for the following camera and lens combinations.
AF540FGZ_OPM_ENG.book Page 82 Friday, January 14, 2011 12:44 PM ■Guide Number (GN) ● Depending on the camera and lens you are using, the effective flash range may be displayed. (Refer to page 81.) Guide numbers indicate flash light intensity. The larger the number, the farther you can reach with your flash. From the guide number, you can easily obtain the proper aperture setting required for an optimum exposure.
AF540FGZ_OPM_ENG.book Page 83 Friday, January 14, 2011 12:44 PM *With the wide-angle panel attached Camera format ISO ISO200 ISO400 Flash light intensity 35mm 645 67 DIGITAL 645D 1/1 1/2 1/4 1/8 1/16 1/32 1/64 1/1 1/2 1/4 1/8 1/16 1/32 1/64 Zoom position 85mm 70mm 50mm 150mm 135mm 100mm 190mm 180mm 120mm 58mm 48mm 34mm 106mm 87mm 62mm 76 54 38 27 19 13.5 9.5 108 76 54 38 27 19 13.5 71 50 35 24.5 17 12 8.5 100 71 50 35 24.5 17 12 64 45 32 22.5 16 11 8 90 64 45 32 22.
AF540FGZ_OPM_ENG.book Page 84 Friday, January 14, 2011 12:44 PM High-Speed Sync Guide Number *With the wide-angle panel attached Camera format ISO ISO100 ISO200 ISO400 84 Shutter speed 35mm DIGITAL 645D 250 500 1000 2000 4000 6000 250 500 1000 2000 4000 6000 250 500 1000 2000 4000 6000 Zoom position 85mm 58mm 106mm 70mm 48mm 87mm 50mm 34mm 62mm 35mm 24mm 43mm 28mm 19mm 35mm 24mm 16mm 30mm *20mm *13mm *25mm 24.2 18.8 14 10.2 7.3 6.2 34.2 26.5 19.8 14.4 10.4 8.8 48.4 37.6 28 20.4 14.6 12.
AF540FGZ_OPM_ENG.
AF540FGZ_OPM_ENG.book Page 86 Friday, January 14, 2011 12:44 PM Zoom position Camera format 20mm 24mm 28mm 35mm 645 35mm 45mm 55mm 70mm 100mm 135mm 150mm 67 55mm 60mm 70mm 90mm 120mm 180mm 190mm DIGITAL 13mm 16mm 19mm 24mm 34mm 48mm 30mm 35mm 43mm 62mm 87mm 106mm 645D F/stop ISO 400 35mm 25mm 50mm 70mm 85mm 58mm F/1.2 3.5 - 35.0 5.4 - 53.3 5.9 - 58.3 6.5 - 65.0 7.5 - 75.0 8.4 - 83.3 9.0 - 90.0 F/1.4 3.0 - 30.0 4.6 - 45.7 5.0 - 50.0 5.6 - 55.7 6.5 - 64.2 7.2 - 71.4 7.
AF540FGZ_OPM_ENG.book Page 87 Friday, January 14, 2011 12:44 PM Optional Accessories A number of dedicated accessories are available for this flash unit. TR Power Pack-3 Hot Shoe Adapter F External power source which supplies power from six C-size batteries. Adapter for connecting the camera and extension cord F5P/F5P L. It also has a hot shoe on its top. Off-camera Shoe Clip CL-10 Extension Cord F5P/F5P L Setting clip for using the AF540FGZ as a wireless slave flash. 0.5m/1.5m/L(Approx.
AF540FGZ_OPM_ENG.book Page 88 Friday, January 14, 2011 12:44 PM Specifications Type Guide No. Clip-on, TTL auto zoom flash unit with series control Maximum 54 (ISO 100/m). In manual mode, seven-step adjustment from M1/1 to M1/64. The focal lengths in the table below are for 35 mm single lens reflex cameras.
AF540FGZ_OPM_ENG.book Page 89 Friday, January 14, 2011 12:44 PM (ISO 400) Focal Length (Zoom position) (M1/1) (=FULL) (M1/2) (M1/4) (M1/8) (M1/16) (M1/32) (M1/64) 85mm 70mm 50mm 35mm 28mm 24mm 20mm* 108 100 90 78 70 64 42 76 71 64 55 49 45 30 54 50 45 39 35 32 21 38 35 32 27.5 24.5 22.5 14.5 27 24.5 22.5 19.5 17 16 10 19 17 16 13.5 12 11 7 13.5 12 11 9.5 8.5 7.5 5 Flash duration (1/2 peak each) Recycling time/Total number of flashes (M1/1) flash: Approx. 1/1200 sec. (TTL) Fastest duration time: Approx.
AF540FGZ_OPM_ENG.book Page 90 Friday, January 14, 2011 12:44 PM Flash modes Flash output compensation Flash output setting Flash sync mode Wireless flash Bounce flash Power saving Red-eye reduction Modeling flash Wide-angle panel Catchlight panel LCD panel illumination Power source Dimensions and weight 90 P-TTL auto, TTL auto, auto, manual. In P-TTL mode, -3.0 to +1.0 levels (0.
AF540FGZ_OPM_ENG.book Page 91 Friday, January 14, 2011 12:44 PM Warranty Policy All PENTAX camera accessories purchased through authorized bona fide photographic distribution channels are guaranteed against defects of material or workmanship for a period of twelve months from date of purchase.
AF540FGZ_OPM_ENG.book Page 92 Friday, January 14, 2011 12:44 PM This warranty policy does not affect customer’s statutory rights. The local warranty policies available from PENTAX distributors in some countries can supersede this warranty policy. Therefore, we recommend that you review the warranty card supplied with your product at the time of purchase, or contact the PENTAX distributor in your country for more information and to receive a copy of the warranty policy.
AF540FGZ_OPM_ENG.book Page 93 Friday, January 14, 2011 12:44 PM Information for Users on Collection and Disposal of Old Equipment and Used Batteries 1. In the European Union These symbols on the products, packaging and/or accompanying documents mean that used electrical and electronic equipments and batteries should not be mixed with general household waste.
AF540FGZ_OPM_ENG.book Page 0 Friday, January 14, 2011 12:44 PM HOYA CORPORATION PENTAX Imaging Systems Division 2-35-7, Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pentax.jp) PENTAX Europe Imaging Systems S.A.S.112 Quai de Bezons, B.P. 204, 95106 Argenteuil Cedex, FRANCE (European Headquarters) (HQ - http://www.pentaxeurope.com) (France - http://www.pentax.fr) PENTAX Imaging Systems GmbH Julius-Vosseler-Strasse 104, 22527 Hamburg, GERMANY (http://www.pentax.
