Operation Manual

262

Using the Flash

• When using two or more external flashes and the contrast control sync mode

is set on the external master flash unit, the flash output ratio is 2 (master unit)

: 1 (slave units). When an external flash is used in combination with the

built-in flash, the flash output ratio is 2 (external flash) : 1 (built-in flash).

• When using multiple external flashes or using an external flash with the

built-in flash, P-TTL is used for flash control.

K-500.book Page 262 Friday, June 14, 2013 2:29 PM