PENTAX O-FC1 User Guide [Operation] This guide explains how to make use of remote control functions with our cameras that are compatible with this memory card. • For details on how to insert the memory card into a camera and establish a wireless LAN connection with a communication device, refer to the “User Guide [Setup]” included with this memory card. • The screen illustrations in this guide are examples. The displayed screens may vary depending on the device.
1 2 3 4 5 6 7 8 Menu Screen Select a function from the menu screen that appears in the browser. 9 10 11 12 13 14 15 16 17 18 Remote Capture t Memo • When the communication device is held in the landscape orientation, only 12, 13, 17, and 18 are displayed. In the [Remote Capture] screen, the camera’s Live View image and buttons pertaining to shooting are displayed.
5 Check the Live View Shooting Images 1 Set the capture functions on the camera. 2 Connect the memory card to the communication image on the communication device. device via wireless LAN. For information on how to establish a connection, refer to the “User Guide [Setup]”. 3 Start the browser on the communication device and display the menu screen. 4 Tap [Remote Capture]. The camera monitor turns off after displaying the message [Remote Capture mode activated].
Tap M to return the settings to their default values. 6 Change the shutter speed, aperture value, exposure compensation value and sensitivity as necessary. 7 When the camera is in AF mode, tap the Tap the options underlined in blue and select a value from the list. focusing point in the Live View image. Autofocusing is performed at the tapped point.
u Caution • Remote Capture cannot be used when the camera is used in the following conditions.
List Display Image View Displays the images saved on the memory card on the communication device. 1 5 1 Tap [Image View] in the 2 6 3 7 menu screen. 4 Or, tap B in the [Remote Capture] screen. The [Image View] screen appears. 8 9 1 2 3 4 5 Folder Display 6 7 8 9 Switches between List Display and Folder Display. Tap a folder name to view a list of the images stored in the folder. Displays the menu screen. Displays the [Remote Capture] screen.
Checking the Image Information Saving an Image Tap the thumbnail to display the image. Tap 1 to return to the [Image View] screen. Touch and hold an image to save the image to the communication device. u Caution t Memo • The location where the image is saved differs depending on the communication device. • Only JPEG files saved on this memory card can be displayed as thumbnails. All other files are displayed as icons and these images cannot be viewed using the Image View feature.
Information Settings 1 In the menu screen, tap Tap [Information]. [Settings]. Communication Info and Version Info can be checked. The [Settings] screen appears. Tap 1 to return to the previous screen. The following settings can be made.
t Memo Communication Settings • For security reasons, it is recommended that the memory card be used after changing the SSID and Network Key. • The changed SSID and Network Key can be reset to the default settings using the [Wireless Memory Card] setting of the camera. The default settings are as follows. • SSID FLUCARD_for_PENTAX • Network Key 12345678 Tap [Communication Settings]. SSID, Network Key (security code), and Channel Setting can be changed.
Camera Settings Language Tap [Camera Settings]. Tap [Language]. Select the image quality for Live View. Select either Japanese or English.
5 Tap [Settings]. Using with an Unsupported Camera The [Settings] screen appears. A camera incompatible with this memory card does not have functions for turning the wireless LAN function on or off, or for resetting the communication settings. Therefore, this memory card cannot be controlled from the camera side. For use with a non-compatible camera, two types of images to control the wireless LAN function need to be created.
7 Turn the camera off and on again, and then Turning the Wireless LAN Function Off establish a wireless LAN connection again. As the default setting, this memory card’s wireless LAN function is set to on. To turn the function off, perform the following operations. The control images shown below are created on the memory card. Image Function 1 Start the browser on the communication device Turns the wireless LAN function on. and display the menu screen. 2 Tap [Settings].
5 Tap 2 and then [OK]. Turning the Wireless LAN Function On The setting is changed. If the wireless LAN function is set to off in the [Communication Settings] screen, the setting cannot be changed on the communication device. To change the setting, perform the following procedure on the camera side. 1 Insert the memory card into the camera. 2 With the camera in playback mode, display the image for wireless LAN control. 6 Turn the camera off and on again. 3 Press B to display the playback mode palette.
t Memo Resetting the Communication Settings • If the camera is turned off and on again when [Auto Wi-Fi Startup] is set to [off], the wireless LAN function is turned off again. To always keep it set to on, change [Auto Wi-Fi Startup] to [on]. When the [SSID] and [Network Key] settings of [Communication Settings] are changed, the changed settings can be returned to their default settings using the control image. 1 Insert the memory card into the camera.
Trademarks • Trek® and FluCard® are trademarks or registered trademarks of Trek Group of Companies in Singapore and/or other countries. • SDHC Logo is a trademark of SD-3C, LLC. • All other trademarks are the property of their respective owners.
