Operation Manual

EN-54
4. Use the four-way controller (
) to select by your preference, then
press the
button.
[Copies]: Allows you to select image quantity (0~10). Use the four-way
controller (
) to set the image quantity.
[Date]: The date of recording can be printed directly on the images.
Select [OK] or [Cancel] with the four-way controller (
).
[Cancel]: To exit the mark function, use the four-way controller
(
) to select [Cancel], then press the button.
5. Press the MENU button to return to the image playback mode.
The is marked on the displayed image.
To unmark the mark, go back to step 3 to select [Reset All] with
the four-way
controller ( ).
Before you perform the DPOF settings on your camera, always remember to copy
your images from the internal memory to an SD memory card first.
The print icon will appear on the monitor indicating images selected for
printing.
You cannot print movies.
Depending on the printer or printing equipment at the photo processing lab., the
date may not be imprinted on the pictures
even if the DPOF settings are made.
OK :
Exit :
Single Image
Copies
Date
Cancel
2
Cancel
1/3
MENU
OK :
Exit :
Single Image
Copies
Date
Cancel
2
OK
2/3
MENU
OK :
Return :
DPOF
One Image
All Images
Reset All