Operation Manual

Getting Started 22

Taking Photos

English

Using the AEB (Auto Exposure Bracketing) Function

When using the AEB (Auto Exposure Bracketing) function, the camera auto-matically takes 3

consecutive photos with different exposures by pressing the Shutter button once. For example, when

the current EV compensation value is +1.0 EV and the AEB bracket interval value is set to ±0.3, the

camera takes shots of the same scene with 3 varying levels of exposure: +0.7 EV, +1.0 EV, and +1.3 EV.

This function is only available in Auto, Auto Scene and P-Mode modes. To set the AEB mode:

1. Press the MENU button to display menu options.

2. Press the Left/Right navigation buttons to select AEB setting.

3. Press the Up/Down navigation buttons to select from the

available options:

• AEB: Select to enable (ON) or disable (OFF) the AEB

function.

• BRACKET: Select to set the bracket interval value ranging

from ±0.3 to ±2.0 EV in 0.3 or 0.4 EV increments.

• EXIT: Select to apply new settings to the camera and return to

the setup menu.

Note:

1. When taking AEB shots, hold the camera steadily. For the best result, use the tripod.

2. Flash, Burst, and M-Burst modes are not allowed when the AEB function is enabled.

AEB

BRACKET

EXIT

0.3EV