Operation Manual

49
1
Getting Started
1 Use the four-way controller (23)
to select [On] or [Cancel].
On Enables Vertical Snap shooting.
Cancel Disables Vertical Snap
shooting.
2 Press the 4 button.
This confirms the Vertical Snap setting and completes the initial
setting. The camera returns to capture status.
When the [Initial Setting] or [Date Adjustment] screen is displayed, you
can cancel the setting operation and switch to the capture mode by
pressing the 3 button. In this case, the [Initial Setting] screen will
appear next time you turn the camera on.
[Language/ ], [Date], [Time], [Hometown], [DST], and [Vertical Snap] can be
changed. Refer to the pages below for instructions.
• To change the language, follow the steps in “Changing the Display Language”
(1p.195).
• To change the date and time, follow the steps in “Changing the Date and
Time” (1p.190).
• To change the city or turn DST on and off, follow the steps in “Setting the
World Time” (1p.193).
• To change the Vertical Snap setting, follow the steps in “To Select Vertical
Snap Setting” (1p.82).
Vertical Snap
Snaps vertical shots like a
cellphone, using OK button
On
Cancel
OK
OK
e_kb489.book Page 49 Thursday, August 13, 2009 3:37 PM