Operating Manual

98
3
Taking Pictures
3 Press the 4 button.
The camera enters the X mode.
Turn the camera 90° clockwise and align
your first picture.
When the camera detects a person’s face,
the Face Detection function is activated and
the face detection frame appears (p.72).
4 Press the shutter release button halfway.
The focus frame on the display turns green when the camera focuses
on the subject at the correct distance.
5 Press the shutter release button
fully.
The first captured image is temporarily
saved, and the shooting screen for the
second image is displayed.
6 Take the second image.
Overlap the image on the preview guide on the left of the screen to
compose the second image. Repeat Steps 4 and 5 to take the second
image.
The stitched first and second image appears on the display (Instant
Review), and then is saved.
• To minimize distortion when taking the second image, turn the camera
so that it pivots around the right edge of the preview guide on the
screen.
• Some distortion may result from moving objects, repeating patterns, or
if nothing exists when overlapping the first and second image on the
preview guide.
• When the Face Detection function is activated (p.72), it works only
when taking the first image (Blink Detection does not work.).
• The stitched together images are saved with the pixel size of f
(2592×1944).
1
2
2
OK
E x it
Exit