Operating Manual

119
7
Settings
1 Press the 0 button in Capture
mode.
The functions registered on the four-way
controller (2345) appear.
2 Use the four-way controller
(2345) to choose the registered
function and change the setting.
Pressing the DISPLAY button when EV Compensation is registered on
the four-way controller displays a histogram showing the EV setting.
(1p.75)
To adjust the white balance, select K (manual) and press the OK
button when White Balance is registered. (1p.67)
3 Press the 0 button or the shutter release button.
The setting is saved and the camera is ready to take pictures.
• Only one function can be registered on each key of the four-way
controller.
• You can choose from the following ten functions: Recorded Pixels,
Quality Level, White Balance, Focusing Area, AE Metering, Sensitivity,
Sharpness, Saturation, Contrast and EV Compensation (+) / (–).
Select [Off] if you do not want to register a function.
• EV Compensation (+) and (–) must be registered as a pair, with (+) on
2 and (–) on 3, or (–) on 4 and (+) on 5. It is not possible to register
only EV Compensation (+) or (–), or to reverse the plus/minus
functions.
• Functions cannot be registered in - (Easy) mode.
Retrieving a Function
Pressing the 0 button in - (Easy mode) displays the Help screen.
(1p.40)
5/17/2004
On
Off
English
Format
Sound
Date Adjust
World Time
Screen Setting
Set-up
MENU
OK
OK
O K
OK
Exit
E x i t
Exit
2304
2304
2304
+0.7
+0.7
+0.7
?/Fn
e_kb348.book Page 119 Tuesday, February 24, 2004 2:43 PM