Operation Manual

141
Shooting Settings
5
8 Press the 3 button.
The screen that was displayed before selecting the menu appears again.
1 Turn the quick dial to select the position 1 to 4.
The Smart Effect settings are loaded, and the camera is ready to take
apicture.
2 Press the four-way controller (3) to change the settings.
The parameter setting screen appears.
3 Use the four-way controller (45) to
change the parameters.
The following parameters can be changed depending on the selected
effect.
4 Press the 4 button.
The camera is ready to take a picture.
Shooting with Smart Effect
Effect Parameter
Brilliant Color/Cross Processing/
Warm Fade/Tone Expansion/Bold
Monochrome/Water Color//Vibrant
Color Enhance
Intensity: 2 levels
Unicolor Bold
Extracted Color: Red/Magenta/Blue/
Cyan/Green/Yellow
Vintage Color Type: 3 types
Cross Processing
Cross Processing
Cancel
Cancel
MENU
OK
OK
OK
PENTAX Q_ENG.book Page 141 Monday, August 29, 2011 8:43 AM