Operation Manual

41
Getting Started
2
3 Pull down the connection cable
cover (1) on the bottom side of the
battery chamber, and insert the DC
coupler into the battery chamber.
To remove the DC coupler, push the
battery lock lever in the direction of the
arrow (2) with your finger. Remove the
DC coupler when it pops out slightly.
4 Close the battery cover.
Pull out the connection cable from the
connection cable cover section.
5 Connect the DC coupler and the AC adapter.
6 Connect the AC adapter to the AC plug cord.
2
1
PENTAX Q_ENG.book Page 41 Monday, August 29, 2011 8:43 AM