Operation Manual

Getting Started

If you set the date and time from the menu, the screen will return to the

[R Set-up 1] menu. In this case, press the 3 button.

Pressing the 3 button while setting the date and time cancels the settings

made up to that point and switches the camera to Capture mode. After initial

settings are complete, if the camera power is turned off before the date and

time settings are complete, the [Date Adjustment] screen will appear first the

next time you turn the camera on. You can also set the date and time from the

menu later. (p.187)

• When you press the 4 button in Step 6, the seconds value is set to 0.

To set the exact time, press the 4 button when the time signal (on the TV,

radio, etc.) reaches 0 seconds.

• You can change the language and date and time settings from the menu.

(p.187, p.190)

PENTAX Q_ENG.book Page 51 Monday, August 29, 2011 8:43 AM