Instructions / Assembly

LIQUID FILTER BAG APPLICATION INFORMATION FORM

This form will help you determine the correct filter bag for your application.

A. BASIC INFORMATION REQUIRED

1. Medium: ❑ Water ❑ Animal Oil ❑ Mineral Oil ❑ Vegetable Oil ❑ Petroleum Oil ❑ Synthetic Oil ❑ Acid ❑$ONDOL❑

Solvent

Specify Common/Chemical Name __________________________________________________________

2. Flow Rate: ________ GPM ________ LPM ________ M2/Hr Other __________________________________

3. Temperature: ________ ˚F ________ ˚C ________

4. Viscosity: ________ SSU ________ CPS Other ____________________________________________________

5. Application:

❑ Water ❑ Cooling ❑ Ground Remediation ❑ Oils ❑ Cutting ❑ Grinding

6. Operation:

❑ Continuous ❑ Batching ❑ Timed Period

Describe Operation _____________________________________________________________________________

7. Type of Pump:

❑ Rotary ❑ Piston ❑ Screw ❑ Centrifugal ❑ Diaphragm ❑ Gravity ❑ Submerged

8. Location of Bag Housing to Pump:

❑ Suction Side ❑ Discharge Side

B. SPECIFIC INFORMATION REQUIRED

1. Particle Type: ❑ Rust ❑ Scale ❑ Grit ❑ Clay Metal ❑ Chips ❑ Fines ❑ Sand ❑ Fibers

2. Particle Physical Properties:

❑ Hard ❑ Soft ❑6WLFN\❑ Gummy

Describe Further ______________________________________________________________________________

3. Particle Size to Be Removed:

❑ Micron __________ ❑ Mesh __________ ❑ Inches __________

4. Particle Size Range: ____________________________________________________________________________

5. Particle Loading:

❑ PPM __________ ❑ Grams __________ ❑ Lbs __________

6. Distribution of Particles by Weight: ________________________________________________________________

_______________________________________________________________________________________________

APPLICATION INFORMATION FORM

PENTAIR

INDUSTRIAL

800.869.0325 SUPPORT

PENTAIRINDUSTRIAL.COM WWW.PENTAIRINDUSTRIAL.COM