User's Manual

Chapter 6 BIOS Configuration
52 TI5VG Pentium VP3 ATX Motherboard User’s Manual
The system supports five modes, numbered from 0 (default) to 4, which
primarily differ in timing. When Auto is selected, the BIOS will select the
best available mode.
IDE Primary Master/Slave UDMA And Secondary Master/Slave
UDMA
This field allows your system to improve disk I/O throughput to
33Mb/sec with the Ultra DMA/33 feature. The options are
Auto
and
Disabled
.
Onboard FDD Controller
This option allows you to select the onboard FDD port.
Onboard Serial/Parallel Port
These fields allow you to select the onboard serial and parallel ports and
their addresses. The default value for these ports are:
Serial Port 1 3F8/IRQ4
Serial Port 2 2F8/IRQ3
Parallel Port 378H/IRQ7
UART 2 Mode
This field determines the UART 2 mode in your computer. The options
are
Standard
,
HPSIR
, and
ASKIR
.
Onboard Parallel Mode
This field allows you to determine parallel port mode function.
SPP Normal Printer Port
EPP Enhanced Parallel Port
ECP Extended Capabilities Port