User's Manual

5 (15)
4. Ensure the headset is connected to its power cord (USB-C cord). LED lightson top
of headset will only show blinking green or solid green to indicate charging status.
5. Ensure the tablet is connected to its power cord (USB-C cord).
SECTION 2: INTERNET CONNECTIVITY
Connecting via WiFi
1. Turn on tablet by pressing power button for approximately 5 seconds (May
take up to 30 seconds if tablet was fully drained of battery).
2. Open the TherapyView™ app if it is not already open.
3. On the log in page, click on the “Network Setup” button.
4. Connect using the desired wireless network name and password.
5.
6. Click the button at the top left of the screen to return to the TherapyView
home screen.
Continue to Section 3 when the components are sufficiently charged, and the system
has secure internet connectivity.
SECTION 3: START-UP SYSTEM FOR PATIENT USE
1. Unplug power cords from tablet and headset when ready to use.
2. If tablet is not turned on, turn on.
3. Turn on headset by pressing and holding power button for approximately 5
seconds.
4. Ensure the patient is in a seated position away from metal components and
remains seated at all times for the duration of the therapy session.
5. Place headset on patient’s head in the sequence numbered below. Patient can
immediately begin visually interacting with the environment.
Note: Size of headset strap and interpupillary distance can be adjusted for fit. Top of
head pad may be removed temporarily for better fit on larger heads.
Note: Patient can keep eyeglasses on.
6. Remove sensor bands from reusable packaging (sold separately). Each patient
should have their own sensor bands and bands should not be shared between
patients.
7. Remove all sensors from sensor charger.