User's Manual

6 (15)
8. Place small sensors onto bands by sliding them into elasticized loops. For the
hand sensor bands, tighten elasticized loop using the buckle. Place large
sensor into pocket of shoulder band.
9. Once sensors are placed in the bands, put each band onto its corresponding
body part (see image below). Connect hook and loop fasteners of shoulder
band if desired. Make sure the elbow sensor is sitting behind the patient’s
elbow. Adjust bands for comfortable fi t, if necessary.
10. Log in on the tablet. Add new patient or select patient from directory; edit
patient information as needed.
11. Once a patient is selected or created, the healthcare provider (HCP) may
initiate the session by pressing “Start Session.”
12. Have the patient sit in a neutral position, facing forward with hands on knees or
thighs. Press the button on the tablet screen to calibrate the sensors.
13. Confirm patient’s avatar in VR space corresponds to actual patient’s physical
movement. Edit the default avatar settings to match your patient. If the
avatar looks correct, press “Continue”. If not, HCP can recalibrate the
sensors by selecting the “Remap Sensors” button.
14. The HCP may navigate to additional therapy activities by selecting the corre-
sponding icon from the display. Once the activity has loaded, the HCP can
press the “Start Activity Session” button to begin the activity. See Section 6 for
more information.