User's Manual

G4 DVR-M1N-RPH User Manual
Page 32 of 112
work.
Disable
x The device is in the non-working status of the complete
machine when the detected voltage is lower than the
protection level.
x After the voltage is restored, the device will not be
awakened.
Disable /
The device uses 10V as the judgment condition for enabling
Low Volt Protection by default, and the switch of the car key
is the same as the above two requirements.
x Battery Low Voltage Protect: When the Low Volt Protection is enabled, the set value decides
whether to turn on the Low Volt Protection.
x Voltage Startup: When the voltage reaches the set value, the device will restart.
x Low Volt Upload: If enabled, it will report the detected low voltage to the platform before
providing protection; this is called "low voltage alarm", reported information including license
plate number, time, and GPS position information.
If the low volt shutdown protection appears, one log will be created and can be checked in the
Log Search screen.
3.5.1.4 User Setup
On the live view screen, tap Login Avatar > Setup > Basic Setup > User Setup and open the
following screen where the normal username and password can be added, deleted, and edited, and
the administrator password can also be edited but the administrator username cannot be edited, nor
can the administrator be deleted.