User's Manual

G4 DVR-M1N-RPH User Manual
Page 40 of 112
x DHCP Mode: The DHCP Mode is used to automatically assign an IP to the device. If this mode
is selected, no other settings are required as the device will connect to the network directly via
the network cable. If it is connected successfully, IP Address, Subnet Mask, and Gateway of the
device will be displayed below.
x Static IP: Ticking the static IP requires the user to know the connectable IP network segment, and
manually enter the IP Address, Subnet Mask and Gateway.
x DNS: supports two ways, automatic acquisition or self-setting.
1) In the DHCP Mode, it supports automatic acquisition or self-setting.