User's Manual

G4 DVR-M1N-RPH User Manual
Page 44 of 112
x Network Type: By default, it is the Mix mode, with 2G/3G/4G/Mix available for choices.
x Dialing Parameters: includes APN, User Name, Password, Number, and Certification (None, PAP,
CHAP, or Mix). Enter the parameters provided by the SMI card manufacturer. By default, it is
null. If so, it will dial according to the program's parameters.
x Active Mode: The network module can be activated by external conditions. The modes include
Always, Telephone or SMS, and IO.
1) Always: After the device is started, the network module automatically starts to dial and
connect to the server.
2) Telephone or SMS: After the device is started, the network module does not work. Only by
calling or sending a message to the phone number of the device can the network module be
activated to start dialing and connect to the server. Up to 3 dialable phone numbers can be
configured.
3) IO: After the device is started, the network module does not work. Only after the IO sensor is
triggered, can the network module be activated to start dialing and connect to the server.
Note: It will automatically dial successfully when there is the corresponding type of SIM card
and normal 3G/4G signal.
3.5.1.6 Application
3.5.1.6.1 FTP Configuration
The device supports connecting to an FTP server. After the IP, port, user name, and password of