User's Manual

G4 DVR-M1N-RPH User Manual
Page 64 of 112
x Sensor Number: You can choose the sensor from 1 to 8, sensor 1 corresponds to the line
labeled SENSOR IN1 above.
x Sensor Name: The name of the corresponding sensor, which can be set manually. After the
setup, the sensor name on the alarm setup screen will be updated synchronously.
x OSD Name: The abbreviation of the name will be displayed when the alarm information is
superimposed on the OSD.
x Trigger Source: Level and pulse. One use can be controlled by high and low levels with
one level sensor, or controlled by pulse switch with two pulse sensors.