User's Manual

G4 DVR-M1N-RPH User Manual
Page 87 of 112
In this screen, you can only enable or disable the Geo-fence alarm and voice broadcast, and
cannot set the location and range of the Geo-fence. The area and line of the Geo-fence can be set on
the CEIBA platform.
3.5.4.3.3 T&H Sensor
At present, 4 T&H sensors are supported. The alarm will be triggered when the temperature of a
sensor reaches the set value. Tap Advanced > T&H Sensor on the Alarm setting screen, as shown in
the following figure:
x Enable: Whether to enable the cover alarm function, check it to enable.
x Alarm Type: Alarm and Event.
x Trigger: Tap Setup to enter the following screen: