User's Manual

G4 DVR-M1N-RPH User Manual
Page 97 of 112
1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the
driver's behavior only when the vehicle speed is within the set range. When the level-1
alarm is triggered, there are both "beep" sounds and voice prompts;
2) Secondary Speed Range: The lower limit of this range varies with the upper limit of the
level-1 alarm speed range.
3) Sensitivity: There are four options: Low, Middle, High, and User-Defined;
4) Duration: The alarm will be triggered only when the duration of action reaches the set
value;
5) Effective Time: It means when an alarm is canceled and the same alarm is triggered
within a certain period after the cancellation, the two alarms are considered the same.
The detailed description is the same as those of the IO alarm.
x Linkage: Tap Setup to set the linkage. The screens and details are the same as those of
the IO Alarm.
¾ PCW: Pedestrian Collision Warning
x Enable: You can check the box to enable the alarm function.
x Alarm Type: Alarm and Event. The detailed description of the difference between alarm
types is the same as those of the IO alarm.
x Trigger: Tap Setup to enter the following screen: