User's Manual

G4 DVR-M1N-RPH User Manual
Page 98 of 112
1) Level Speed Range: Level-1 alarm for speed range: The alarm will be triggered by the
driver's behavior only when the vehicle speed is within the set range. When the level-1
alarm is triggered, there are both "beep" sounds and voice prompts;
2) Secondary Speed Range: The lower limit of this range varies with the upper limit of the
level-1 alarm speed range.
3) Sensitivity: There are four options: Low, Middle, High, and User-Defined;
4) Duration: The alarm will be triggered only when the duration of action reaches the set
value;
5) Effective Time: It means when an alarm is canceled and the same alarm is triggered
within a certain period after the cancellation, the two alarms are considered the same.
The detailed description is the same as those of the IO alarm.
x Linkage: Tap Setup to set the linkage. The screens and details are the same as those of the
IO Alarm.
3.5.4.4.3 BSD Alarm
The BSD is short for Blind Spot Detection. Connect to the BSD cameras to enable the alarm
functions. The settings for BSD alarm are as follows: