User's Manual

PePLink Surf User’s Manual v2.6

Click the “Advanced Config” button to enter the parameters of the access

point to associate to. You should see this screen:

In the field “SSID” under Wireless Settings, input the access point’s SSID

(sometimes it is called “network name”). According to the setting of the

Access Point you are associating to, you may choose different

“Authentication setting”.

If “Static WEP key” or “WPA/WPA2-Personal” is selected, input the

Encryption Key field as well.

Click the “Save” button at the bottom to complete.

You can now click the “Connect” link on the top bar and then click the

“Connect” button to associate with the access point.

There are also options of “802.1x with dynamic WEP key” and

“WPA/WPA2-Enterprise”. For their details, please refer to chapter 4.4 .