User Guide

http://www.peplink.com

If you are not using drop-in mode, select the connection method for the WAN connection(s) from

the following screen:

Depending on the selection of connection type, further configuration may be needed. For

example, PPPoE and static IP require additional settings for the selected WAN port. Please

refer to Section 13, Configuring the WAN Interface(s) for details on setting up DHCP, static

IP, and PPPoE.

If Mobile Internet Connection is checked, the setup wizard will move on to Operator Settings.

If Custom Mobile Operator Settings is selected, APN parameters are required. Some service

providers may charge a fee for connecting to a different APN. Please consult your service

provider for the correct settings.

Click on the appropriate check box(es) to select the preferred WAN connection(s). Connection(s)