User Guide

http://www.peplink.com
66
Copyright @ 2017 Peplink
Network
Isolation
A
Spanning Tree
Protocol
A
When Layer 2 bridging is enabled, this field specifies the port to be bridged to the remote
site. If you choose WAN, the selected WAN will be dedicated to bridging with the remote
site and will be disabled for WAN purposes. The LAN port will remain unchanged.
Override IP
Address when
bridge is
connected
A
Select "Do not override" if the LAN IP address and local DHCP server should remain
unchanged after the Layer 2 PepVPN is up.
If you choose to override IP address when the VPN is connected, the device will not act as
a router, and most Layer 3 routing functions will cease to work.
A
- Advanced feature, please click the button on the top right-hand corner of the Network
Settings menu to activate.
12.2.3 Network Settings (Common Settings)
For VLAN-enabled configurations, DHCP Server settings are accessible by clicking individual
VLAN
DHCP Server Settings
DHCP Server
When this setting is enabled, the Peplink Balance’s DHCP server automatically assigns an
IP address to each computer that is connected via LAN and configured to obtain an IP
address via DHCP. The Peplink Balance’s DHCP server can prevent IP address collisions
on the LAN.