User Manual

PePLink PolePoint 200BG / 400BG User Manual

IP Start and Stop Range: the IP address range to be offered to DHCP

clients

Subnet Mask: the subnet mask the DHCP clients to be used

Broadcast Address: the broadcast address the DHCP clients to be used

Gateway: the default routing gateway the DHCP clients to be used

DNS 1, 2 and 3: the DNS servers’ IP address to be offered to the DHCP

clients

Domain: the domain name the clients to be used

Lease Time: the leased of DHCP records

Security Policies: to configure the wireless authentication and encryption

method. Available options are: None, Static WEP, 802.1x and WPA.

None: to disable encryption. Data are sent over the air without any

protection

Static WEP: to enable pre-shared WEP key encryption. Authentication

is not supported by this method. The security level of this mode is

known to be weak. When this is set, the following parameters have to

be entered.

Key Size: 40bits and 104 bits

Key Format: ASCII and HEX

Encryption Key: For ASCII format, key length is either 5 or 13. For

HEX format, key length is either 10 or 26.