User Manual

PePLink PolePoint 200BG / 400BG User Manual

802.1x: to enable 802.1x radius-based authentication with dynamic

WEP key. When it is set, the following parameters have to be entered:

Key Size: 40bits and 104 bits

Broadcast Key Index: 1, 2, 3 or 4

Re-keying Period: Re-keying every this amount of seconds. The

default is 14400 secs (4 hours). A value of 0 means disable

re-keying.

WPA-TKIP / WPA-AES:CCMP: to enable WPA, WPA-PSK, WPA2 or

WPA2-PSK. WPA-TKIP is for WPA and WPA-PSK. WPA-AES:CCMP is for

WPA2 and WPA2-PSK

For WPA and WPA2, 802.1x radius-based authentication with TKIP

encryption method will be used. The Pre-Shared Key option should be

disabled. This method’s security level is known to be very high

For WPA-PSK and WPA2-PSK, a Pre-Shared Key, or Pass phrase, will be

used for data encryption and authentication. “Pre-Shared Key” option

should be enabled. Key length must be 8 to 63 characters. This

method’s security level is known to be high and is higher than Static WEP

key.

Figure 9

Figure 10