User Manual

PePLink PolePoint 200BG / 400BG User Manual
Copyright © 1999-2006 PePLink Ltd. All Rights Reserved Page 12 of 20
After finished to modify the settings, press the “Save” button to make the
changes effective.
5.2 SNMP Settings
The PePLink PolePoint supports SNMP v1, v2 and v3. The SNMP Server
Settings page allows you to configure the SNMP server settings.
When you click the “SNMP Settings” link on the left side bar, you will see this
page:
Server Name: the name to identify this SNMP server
SNMP v1, v2, v3: to enable or disable the support of each version of SNMP
protocols.
You can control the access right by adding SNMPv1/v2 Communities and
SNMPv3 Users.
Figure 12
Figure 11