User Manual

PePLink PolePoint 200BG / 400BG User Manual

5.5 Commands

This section allows you to perform some system commands.

- Save Current Configuration to Flash – The changes made are not

saved to the flash. The configurations will be lost after reboot. To

make the changes persistence across reboot, you can choose Save

Current Configuration to Flash

- Download Active Configuration – Select this command to download

the active configuration for backup purpose

- Upload Configuration – Select this command to upload a backed up

configuration file. After uploaded, changes are not effectively

immediately.

- Upgrade Firmware – Select this command to upload a firmware file for

upgrading the system software. Upgrading the firmware requires a

reboot.

- Activate Changes – This is for activating saved changes. But note that

the configurations are not saved to the flash memory.

- Download Debug Information File – If you find some problems that

need to get technical support from PePLink, please send along with a

debug file with your e-mail request. This option is for you to download

Figure 16