User Manual

PePLink PolePoint 200BG / 400BG User Manual

4.2 Quick Start

With the default settings, an SSID is predefined, which is “PePLink_XXXX”

where XXXX is the last 4 digits of the MAC Address. It has both encryption

and VLAN tagging off. It bridges the wireless clients to the Ethernet port.

So you may now access the Ethernet by associating to it with a Wi-Fi client.

After associated, you should see the session information shown on the

PePLink PolePoint’s web admin interface under the section “– Connected

Clients”.

When you click on the link “Details”, you should see the client’s details.

Figure 3

Figure 4