User Manual

PePLink PolePoint 200BG / 400BG User Manual
Copyright © 1999-2006 PePLink Ltd. All Rights Reserved Page 7 of 20
5 Configurations
5.1 WLANs Settings
Most of Wi-Fi related parameters are configurable in the “WLANs Settings”
page accessible from the left side bar. The page is like this:
The column “WLAN SSID” shows the virtual APs’ SSID.
“Default VLAN ID” is the VLAN ID to be tagged on all outgoing packets (leave
from the LAN port) generated from the virtual AP. The Default VLAN ID will
be overridden if per-user VLAN ID is specified in the radius server’s
authentication reply when 802.1x is enabled.
Admin Status shows the virtual AP is enabled or disabled.
Security Policies show the wireless authentication and encryption method
configured.
Figure 5