User Manual

PePLink PolePoint 200BG / 400BG User Manual

cannot be hidden from scan. To associate with it, the client should specify

the correct ESSID upon association. This is enabled by default.

Default Quality of Service: the 802.1p QoS value to be marked to all

outgoing packets (leave from the LAN port) generated from the virtual AP.

If per-user or per-domain QoS value is specified, the Default Quality of

Service value will be overridden. Possible values are Gold, Silver and

Bronze.

DHCP Server Type: To choose to enable DHCP server, to enable DHCP

relay or to just pass DHCP requests to the Ethernet port.

- None: DHCP requests will not be processed but will be passed to the

Ethernet.

- Relay: the PolePoint will relay DHCP requests to a specified DHCP Server.

This option could avoid broadcast messages being propagated on the

backbone network.

- Server: the PolePoint will allocate and offer IP addresses locally.

If the type “Relay” is chosen, the DHCP Server IP address will be prompted.

If the type “Server” is chosen, the following information will be prompted:

Figure 7