Specification Sheet
Switch Capacity
Max. Packet
Forwarding Rate
20 Gbps
14.9 Mpps
36 Gbps
26.8 Mpps
88 Gbps
66 Mpps
MAC Address Table
Inter-VLAN Routing
8,000 8,000
32,000
Ground PIN
Ignition PIN
SD Switch Rugged, 24-Port
24x GE (PoE+) Ports
USB Port for
2x 10G
SFP+ Ports
Management
Console
Reset ButtonLED
12V-54V DC
Terminal Block
2x 54V
DC Power DIN
Front
Industrial-Grade PoE+ Switch with Cloud Intelligence
SD Switch Rugged
PoE+
Output
Out-Of-Band
Management
LAN Bypass Ports
: If the switch loses power , the
LAN bypass ports will still connect.
Simplified LAN Management
Greater Deployment Flexibility
Ready for Any Environment
16-Port SD-Switch Rugged: LAN Bypass and Combo Port
Combo Port
: ETH 16 and SFP 1 are a combo port
that share the same port number.
SD-Switch
16pt Rugged
Balance SDX
The SD-Switch Rugged can handle -40°F
(-40°C) to 149°F (65°C). The fanless design
enables it to function in high-particle
environments.
No more command lines. Use InControl 2 cloud management to remotely monitor,
troubleshoot, and configure your network:
Monitor
: Port status, connectivity, firmware version.
Troubleshoot
: See all clients, search by MAC address.
Configure
: Centralize VLAN, firmware, and configurations.
www.peplink.com
©Peplink International. All rights reserved.
Ref. no: sd-switch-rugged-202008-v2
Product Code
Description
Product Code
Description
PSW-8-240W-RUG
PoE enabled (delivers up to 240W) Gigabit (8 ports) and SFP (2 ports) switch with a fanless design for industrial environments.
PSW-24-250W-RUG
PoE enabled (delivers up to 250W) Gigabit (24 ports) and SFP+ (2 ports) switch with a fanless design for industrial environments.
Product Ordering Information
PSW-16-240W-RUG
PoE enabled (delivers up to 240W) Gigabit (16 ports) and SFP (2 ports) switch with a fanless design for industrial environments.
LAN Interface
Power Input
Dimensions
(L x W x H)
Weight
Humidity
Operating
Temperature
Warranty
Power
Consumption
VLAN Groups
Fiber Module
DC Power DIN 2x 54V
Terminal Block: 12V - 56V DC
8.2 x 6.3 x 1.7 inches
210 x 160 x 43 mm
2.2 pounds
1.0 kg
15% – 95% (non-condensing)
FCC, CE, RoHS, E-Mark, IC
EN 61373:1999 IEC 61373:1999 :
Shock and Vibration Resistance
EN 50155: Railway Applications
EN 61000: Electromagnetic Compatibility
EN 45545-2: Fire Protection on Railway Vehicles
-40° – 149°F
-40° – 65°C
1-Year Limited Warranty
20W System,
90W PoE+ Power Budget
(supports up to 240W
#
)
Yes
2x 1 Gbps
8x 802.3at (PoE+) GE Ports
@
,
2x SFP Ports
# The bundled PSU provides 90W of PoE power budget. If you require 240W of power budget, please add 180W PSU (ACW-623) to your device.
% The bundled PSU provides 120W of PoE power budget. If you require 250W of power budget, please add 180W PSU (ACW-623) to your device.
@ PoE output requires a minimum of 48V power input. * Pending certification
7.5 x 9.0 x 1.5 inches
190 x 226 x 35 mm
4.4 pounds
2.0 kg
15% – 95% (non-condensing)
1-Year Limited Warranty
Yes
2x 1 Gbps
AC Adaptor
AC Input 100V-240V
DC Output 54V
#
Specifications
DC Power DIN 2x 54V
Terminal Block: 12V - 56V DC
20W System,
90W PoE+ Power Budget
(supports up to 240W
#
)
AC Input 100V-240V
DC Output 54V
#
-40° – 149°F
-40° – 65°C
8x 802.3at (PoE+) GE Ports
@
,
8x GE Ports
2x SFP Ports
24x 802.3at (PoE+) GE Ports,
2x SFP+ Ports
Yes
10.5 x 19.1 x 1.7 inches
265 x 485 x 45mm
11.3 pounds
5.14 kg
15% - 95% (non-condensing)
1-Year Limited Warranty
50W System,
120W PoE+ Power Budget
(supports up to 250W
%
)
Redundant DC Power DIN: 54V
Terminal Block: 12V - 54V DC
2x 10 Gbps
-40° – 149°F
-40° – 65°C
AC Input 100V-240V
DC Output 54V
%
Console Port
USB Port for Out-Of-Band
Management
12V-56V DC
Terminal Block
2x 54V
DC Power DIN
Management
Port
Ground
PIN
Status
LED
8x GE
(PoE+) Ports
8x GE Ports
2x SFP LAN
Reset
Button
2x LAN
Bypass Ports
Combo Ports
SD Switch Rugged, 16-Port
Back
Front
Reset
Button
Management
Console
USB Port for Out-Of-Band
Management
8x GE
(PoE+) Ports
2x SFP LAN
Status
LED
12V-56V DC
Terminal Block
2x 54V
DC Power DIN
SD Switch Rugged, 8-Port
Front
Back
Back
Combo Port
SD Switch Rugged, 8-Port SD Switch Rugged, 16-Port SD Switch Rugged, 24-Port
Certification
FCC, CE, RoHS, E-Mark, IC
EN 61373:1999 IEC 61373:1999 :
Shock and Vibration Resistance
EN 50155: Railway Applications
EN 61000: Electromagnetic Compatibility
FCC, CE, RoHS, IC*
EN 61000: Electromagnetic Compatibility*