Data Sheet

1
Inductive sensor NJ1,5-F2-E2-V1
Release date: 2011-07-22 15:51 Date of issue: 2011-07-22 086588_eng.xml
Germany: [phone]
Subject to modifications without notice
Pepperl+Fuchs Group
[e-mail]
USA: [phone]
[e-mail]
Singapore: [phone]
[e-mail]
Copyright Pepperl+Fuchs
Dimensions
Technical Data
General specifications
Switching element function PNP NO
Rated operating distance s
n
1. 5 m m
Installation embeddable
Output polarity DC
Assured operating distance s
a
0 ... 1.215 mm
Nominal ratings
Operating voltage U
B
10 ... 30 V DC
Switching frequency f 0 ... 1000 Hz
Reverse polarity protected reverse polarity protected
Short-circuit protection pulsing
Voltage drop U
d
≤ 3 V
Operating current I
L
0 ... 200 mA
No-load supply current I
0
≤ 15 mA
Indication of the switching state LED, red
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Connection type Device connector M12 x 1 , 4-pin
Housing material PA
Protection degree IP67
Note Use a stop screw combined with a model -F2 sensor from Pep-
perl+Fuchs GmbH.
The maximum actuation speed of the control slide is 0.1 m/s
Compliance with standards and directives
Standard conformity
Standards
EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
6
12
14.7
25
3*
40
M12 x 1
31
32.6
Model Number
NJ1,5-F2-E2-V1
Features
• 1.5 mm with switching tappet
•3-wire DC
Connection
Pinout
Accessories
AS 12/80
Stop screw
V1-G
4-pin, M12 female field-attachable connector
V1-W
4-pin, M12 female field-attachable connector
V1-G-2M-PUR
Cable socket, M12, 4-pin, PUR cable
V1-W-2M-PUR
Cable socket, M12, 4-pin, PUR cable
AS 08/15
Stop screw
AS 08/40
Stop screw
1
L+
L-
4
3
1
3
4
2
1 BN
2 WH
3 BU
4 BK
Wire colors in accordance with EN 60947-5-2
(brown)
(white)
(blue)
(black)