Data Sheet

1
Inductive sensor NJ40+U10+E2
Release date: 2016-09-29 11:40 Date of issue: 2016-10-10 087418_eng.xml
Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
S
Model Number
NJ40+U10+E2
Features
•Comfort series
• 40 mm non-flush
• With cable gland for cable diameters
from 7 to 10.5 mm (extendable with dif-
ferent gasket)
Accessories
V1-M20-80
Receptacles, M12/M20; plastic version
V1-W
Female connector, M12, 4-pin, field attachable
V1-G
Female connector, M12, 4-pin, field attachable
MHW 01
Modular mounting bracket
Technical Data
General specifications
Switching element function PNP NO
Rated operating distance s
n
40 mm
Installation non-flush
Output polarity DC
Assured operating distance s
a
0 ... 32.4 mm
Actual operating distance s
r
36 ... 44 mm typ. 40 mm
Reduction factor r
Al
0.5
Reduction factor r
Cu
0.45
Reduction factor r
304
0.8
Nominal ratings
Operating voltage U
B
10 ... 60 V
Switching frequency f 0 ... 100 Hz
Hysteresis H 1 ... 10 typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Volta ge drop U
d
≤ 2.8 V
Volta ge drop at I
L
Voltage drop I
L
= 1 mA, switching element
on U
d
0.5 ... 2.3 V typ. 0.9 V
Voltage drop I
L
= 10 mA, switching element
on U
d
0.8 ... 2.2 V typ. 1.4 V
Voltage drop I
L
= 20 mA, switching element
on U
d
0.9 ... 2.3 V typ. 1.5 V
Voltage drop I
L
= 50 mA, switching element
on U
d
0.9 ... 2.5 V typ. 1.6 V
Voltage drop I
L
= 100 mA, switching ele-
ment on U
d
1 ... 2.6 V typ. 1.8 V
Voltage drop I
L
= 200 mA, switching ele-
ment on U
d
1.2 ... 2.8 V typ. 2 V
Operating current I
L
0 ... 200 mA
Off-state current I
r
0 ... 0.5 mA typ. 0.01 mA
Off-state current T
U
=40 °C, switching ele-
ment off
≤ 100 µA
No-load supply current I
0
≤ 10 mA
Time delay before availability t
v
≤ 100 ms
Operating voltage indicator LED, green
Switching state indicator LED, yellow
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -25 ... 85 °C (-13 ... 185 °F)
Mechanical specifications
Connection type screw terminals
Information for connection A maximum of two conductors with the same core cross-section
may be mounted on one terminal connection!
tightening torque 1.2 Nm + 10 %
Core cross-section up to 2.5 mm
2
Minimum core cross-section
without wire end ferrule 0.5 mm
2
, with connector sleeves 0.34 mm
2
Maximum core cross-section
without wire end ferrule 2.5 mm
2
, with connector sleeves 1.5 mm
2
Housing material PBT
Sensing face PBT
Degree of protection IP68
Compliance with standards and directives
Standard conformity
Standards
EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval Certified by China Compulsory Certification (CCC)