Data Sheet

1
Inductive sensor NCB5-18GM40-N0-10M
Release date: 2019-04-25 16:36 Date of issue: 2019-04-25 181109_eng.xml
Germany: [phone]Pepperl+Fuchs Group
Refer to "General Notes Relating to Pepperl+Fuchs Product Information".
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
0102
Model Number
NCB5-18GM40-N0-10M
Features
• Comfort series
Accessories
EXG-18
Quick mounting bracket with dead stop
BF 18
Mounting flange, 18 mm
Technical Data
General specifications
Switching function Normally closed (NC)
Output type NAMUR
Rated operating distance s
n
5 mm
Installation flush
Assured operating distance s
a
0 ... 4.05 mm
Actual operating distance s
r
4.5 ... 5.5 mm typ. 5 mm
Reduction factor r
Al
0.35
Reduction factor r
Cu
0.3
Reduction factor r
304
0.74
Output type 2-wire
Nominal ratings
Nominal voltage U
o
8 V
Switching frequency f 0 ... 400 Hz
Hysteresis H 1 ... 15 typ. 5 %
Reverse polarity protection reverse polarity protected
Short-circuit protection yes
Current consumption
Measuring plate not detected
≥ 3 mA
Measuring plate detected
≤ 1 mA
Switching state indicator all direction LED, yellow
Functional safety related parameters
MTTF
d
2040 a
Mission Time (T
M
) 20 a
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -25 ... 100 °C (-13 ... 212 °F)
Storage temperature -40 ... 100 °C (-40 ... 212 °F)
Mechanical specifications
Connection type cable PVC , 10 m
Core cross-section 0.75 mm
2
Housing material Stainless steel 1.4305 / AISI 303
Sensing face PBT
Degree of protection IP67
Cable
Bending radius
> 10 x cable diameter
General information
Use in the hazardous area see instruction manuals
Category
1G; 2G; 3G; 1D; 3D
Compliance with standards and
directives
Standard conformity
NAMUR
EN 60947-5-6:2000
IEC 60947-5-6:1999
Standards
EN 60947-5-2:2007
EN 60947-5-2/A1:2012
IEC 60947-5-2:2007
IEC 60947-5-2 AMD 1:2012
Approvals and certificates
EAC conformity TR CU 012/2011
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
CCC approval CCC approval / marking not required for products rated ≤36 V
Dimensions
LED
40
37
M18x1
4
24