Data Sheet

1
Inductive sensor NBN25-30GM50-E2-V1-M
Release date: 2017-02-15 14:57 Date of issue: 2017-02-15 240194_eng.xml
Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
S
E 1
Model Number
NBN25-30GM50-E2-V1-M
Features
• 25 mm non-flush
• Extended temperature range
-40 ... +85 °C
• E1-Type approval
• Increased noise immunity 100 V/m
• With increased sealing, protection
class
IP68 / IP69K
• Highly shock and vibration resistant
Accessories
BF 30
Mounting flange, 30 mm
V1-G
Female connector, M12, 4-pin, field attachable
V1-G-2M-PUR
Female cordset, M12, 4-pin, PUR cable
V1-W
Female connector, M12, 4-pin, field attachable
V1-W-2M-PUR
Female cordset, M12, 4-pin, PUR cable
Technical Data
General specifications
Switching function Normally open (NO)
Output type PNP
Rated operating distance s
n
25 mm
Installation non-flush
Output polarity DC
Assured operating distance s
a
0 ... 20.25 mm
Reduction factor r
Al
0.5
Reduction factor r
Cu
0.45
Reduction factor r
304
0.7
Reduction factor r
Brass
0.5
Output type 3-wire
Nominal ratings
Operating voltage U
B
5 ... 60 V
Switching frequency f 0 ... 200 Hz
Hysteresis H typ. 5%
Reverse polarity protection reverse polarity protected
Short-circuit protection pulsing
Inductive overvoltage protection yes
Surge suppression yes
Volta ge drop U
d
≤ 2 V
Rated insulation voltage U
BIS
60 V
Operating current I
L
0 ... 200 mA
Off-state current I
r
0 ... 0.5 mA typ. 6 µA at 25 °C
No-load supply current I
0
≤ 7 mA
Time delay before availability t
v
≤ 220 ms
Switching state indicator Multihole-LED, yellow
Functional safety related parameters
MTTF
d
830.5 a
Mission Time (T
M
) 20 a
Diagnostic Coverage (DC) 0 %
Ambient conditions
Ambient temperature -40 ... 85 °C (-40 ... 185 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Connector M12 x 1 , 3-pin
Housing material brass, nickel-plated
Sensing face PBT
Degree of protection IP68 / IP69K
Mass 94 g
Compliance with standards and directives
Standard conformity
Standards
EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
EAC conformity TR CU 020/2011
CCC approval Certified by China Compulsory Certification (CCC)
E1 Type approval 10R-04
Dimensions
Electrical Connection
36
52
66
18
5
M30 x 1.5
8
M12 x 1
LED
1
L+
L-
4
3