Datasheet
1
Release date: 2009-04-20 16:35 Date of issue: 2009-04-20 107461_ENG.xml
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany +49 621 776-0 • USA +1 330 4253555 • Singapore +65 67799091 • Internet http://www.pepperl-fuchs.com
Mounting flange BF 30-F
Dimensions
Technical data
General specifications
Inside diameter 30 mm
Ambient conditions
Ambient temperature -25 ... 85 °C (248 ... 358 K)
Mechanical specifications
Material Polycarbonate (PC), black
Note
Installation
• Position the mounting bracket on the desired place
• Mark the position of drilling holes in the mid section of the oblong holes
• Drill the mounting holes through the surface
• Screw on the mounting bracket slightly via the lateral oblong holes by using suitable M4
screws
• Stick the sensor through the mounting bracket and fix the sensor by the lid on the upper
part of the bracket
• Adjust the bracket and make the final positioning
• Fix the mounting bracket finally with the screws
Dead stop
4.2
7.8
4.1
17
4
14
13
35
35
29
41
33
24
17
ø 30
Model Number
BF 30-F
Mounting flange with dead stop, 30 mm
Features
• Black plastic housing with dead stop
for all cylindrical sensors with M30
thread
• Easy sensor replacement via fixing
flap in the top of the fixing flange
• Embeddable sensors lie flush with
the surface of the fixing flange
• The cap of a non-embeddable sensor
protrudes through the fixing flange.
This allows non-embeddable sensors
to be easily mounted on metal surfac-
es.
• max. 8 mm range of adjustment is
provided for the positioning of the
flange by means of the elongated
holes on the side