Datasheet

1
Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany [phone] • USA [phone] • Singapore [phone] • Internet http://www.pepperl-fuchs.com
BF 8-FMounting flange
Release date: 2006-03-10 17:42 Date of issue: 2006-03-10 187004_ENG.xml
Model number
BF 8-F
Befestigungsflansch mit Festanschlag,
8 mm
Features
• Black plastic housing with dead stop
for all cylindrical sensors with M8
thread
• Easy sensor replacement via fixing
flap in the top of the fixing flange
• Embeddable sensors lie flush with
the surface of the fixing flange
• The cap of a non-embeddable sensor
protrudes through the fixing flange.
This allows non-embeddable sensors
to be easily mounted on metal surfac-
es.
• max. 4 mm range of adjustment is
provided for the positioning of the
flange by means of the elongated
holes on the side
Dimensions
Technical data
General specifications
Inside diameter 8 mm
Ambient conditions
Ambient temperature -25 ... 85 °C (248 ... 358 K)
Mechanical specifications
Material Polycarbonate (PC), black
Notes
Installation
• Position the mounting bracket on the desired place
• Mark the position of drilling holes in the mid section of the oblong holes
• Drill the mounting holes through the surface
• Screw on the mounting bracket slightly via the lateral oblong holes by using suitable M4
screws
• Stick the sensor through the mounting bracket and fix the sensor by the lid on the upper
part of the bracket
• Adjust the bracket and make the final positioning
• Fix the mounting bracket finally with the screws
Dead stop
5.5
12
20
22
13.5
10
3.9
4
10.1
4.2
4