Datasheet

1
Release date: 2016-06-10 18:11 Date of issue: 2016-06-10 263361_eng.xml
Activator BT115A
Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Dimensions
Technical data
General specifications
Ring diameter ≤ 110 mm
Spring ring height ≤ 7 mm
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Shaft diameter < 90 mm
Shaft height 30 mm and 50 mm
Mounting hole pattern 30 x 130 mm
Material
Housing Mounting component: PA
Spacer disk PA (2 units, 10 mm strong)
Stopper cap PE (1 unit black)
Identification stopper PA (2 units yellow, 2 units black)
Mounting screw for activator: 1.4305 / AISI 303 (1 unit M6 x 25)
for sensors - F31: 1.4305 / AISI 303 (4 items M5 x 16, (2 pieces
M5 x 12)
Activation target Stainless steel 1.4305 / AISI 303 (integrated)
Mass 120 g
Note
The activator consists of a conductive plastic material which prevents static charging and
allows installation in potentially explosive environments.
Activation target
Stopper cap
Identification stopper
63
59
115
Model Number
BT115A
Activator for F31 series
Features
• For right and left rotating drives with
180° rotational motion
• Four fixed actuating lugs, offset by 90°