Datasheet

1
Release date: 2016-06-10 18:11 Date of issue: 2016-06-10 259055_eng.xml
Activator BT115X
Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Dimensions
Technical data
General specifications
Ring diameter ≤ 110 mm
Spring ring height ≤ 7 mm
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Shaft diameter < 90 mm
Shaft height 30 mm and 50 mm
Mounting hole pattern 30 x 130 mm
Material
Housing Mounting component: PA
Spacer disk PA (2 units, 10 mm strong)
Stopper cap PE (1 unit black)
Identification stopper PA (2 units yellow, 2 units black)
Mounting screw for activator: 1.4305 / AISI 303 (1 unit M6 x 25)
for sensors - F31: 1.4305 / AISI 303 (4 items M5 x 16, (2 pieces
M5 x 12)
Activation target Stainless steel 1.4305 / AISI 303 (integrated)
Mass 140 g
Note
The activator consists of stainless steel and a conductive plastic material which prevents
static charging and allows installation in potentially explosive environments.
Stopper cap
Identification stopper
End positions undamped
Unrolled jacket:
Fixing part
Function part
27
16
11
59
115
62.5
0° 180°90° 360°
Model Number
BT115X
Activator for F31 series
Features
• Suitable for right and left rotating
drives
• Action reversed (end position un-
damped)