Datasheet

1
Release date: 2016-12-21 16:07 Date of issue: 2016-12-21 263360_eng.xml
Activator BT65A
Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Dimensions
Technical data
General specifications
Ring diameter ≤ 65 mm
Spring ring height ≤ 6 mm
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Mechanical specifications
Shaft diameter < 58 mm
Shaft height 20 mm and 30 mm
Mounting hole pattern 30 x 80 mm
Material
Housing Mounting component: PA
Spacer disk PA (1 unit, 10 mm strong)
Stopper cap PE (1 unit black)
Identification stopper PA (2 units yellow, 2 units black)
Mounting screw for activator: 1.4305 / AISI 303 (1 unit M6 x 25)
for sensors - F31: 1.4305 / AISI 303 (4 items M5 x 16, (2 pieces
M5 x 12)
Activation target Stainless steel 1.4305 / AISI 303 (integrated)
Mass 40 g
Note
The activator consists of a conductive plastic material which prevents static charging and
allows installation in potentially explosive environments.
0° 180°90° 360°
270°
7.5
26.5
12.2
18.5
12
38.5
ø 41.9
ø 65
Activation target
Stopper cap
Identification stopper
Unrolled jacket
Model Number
BT65A
Activator for F31 series
Features
• Four fixed actuating lugs, offset by 90°
• For right and left rotating drives with
180° rotational motion