User Manual
Table Of Contents
- 1 Introduction
- 2 Certificates and approvals
- 3 Product Description
- 3.1 RFID Frequency Bands
- 3.2 UHF general
- 3.3 Countries of Use
- 3.3.1 European Union
- 3.3.2 Argentina
- 3.3.3 Australia
- 3.3.4 Brazil
- 3.3.5 Canada
- 3.3.6 China
- 3.3.7 Hong Kong
- 3.3.8 India
- 3.3.9 Japan
- 3.3.10 Colombia
- 3.3.11 Malaysia
- 3.3.12 Morocco
- 3.3.13 Mexico
- 3.3.14 New Zealand
- 3.3.15 Russia
- 3.3.16 Singapore
- 3.3.17 South Korea
- 3.3.18 Thailand
- 3.3.19 United States of America
- 3.3.20 Vietnam
- 3.4 General Functions and Features
- 3.5 Indicators and Operating Elements
- 3.6 Connection
- 3.7 Scope of Delivery
- 3.8 Accessories
- 4 Installation
- 5 Commissioning
- 6 Operation
- 7 Service and Maintenance
- 8 Troubleshooting
- 9 Appendix
2022-11
30
IUH-F192-V1-*
Commissioning
5 Commissioning
5.1 Definitions
5.1.1 Display
Angle brackets contain the abbreviated meaning of a command structure, e.g., <Data>
The index
hex
or .xx denotes a hexadecimal number.
hex
ASCII
denotes a value in the hexadecimal system, specified in ASCII characters.
Example: 10
dec
corresponds to A
hex
; A
ASCII
corresponds to 41
hex
. see chapter 9.2
5.1.2 Legend
<ChanNo>: IDENTControl channel
<CHCK>: 1 byte, 8-bit check sum with the addition of all preceding charac-
ters, without overflow
<Data>: Data with the size <WordNum> multiplied by 4 bytes
<DataLength>: Length of the data specified to a command, 2 characters binary,
HighByte, LowByte
eirp: equivalent isotropically radiated power
erp: effective radiated power
<ETX>: 1 byte = 03
hex
<read-only code>: TID, 4 bytes + an optional 4 or 8 bytes
<Ldata>: Length of the data in bytes, 2 bytes
Use in multiframe protocol
<Length> 1 character hex
ASCII
= number of data bytes
Permitted values in the read/write head IUH*: 2, 4, 6, 8, A, C, E
<Luii>: Length of the UII in bytes, 2 bytes
Use in multiframe protocol
<LogicalOperation>: Links several filters; OR = 0; AND = 1
If one filter only is used, this value is ignored
<MaskData>: Mask specification
<MaskLength>: Mask length in bits, values: 00…FF
<MemBank>: Number of the memory bank (see parameter MB)
<ParamTyp>: Parameter type, 2 bytes, or 2 ASCII characters
<Negate>: Negates the mask comparison; not negated = 0; negated = 1
<PC>: Protocol control word according to EPC Gen 2 (ISO/IEC 18000-
63), 2 bytes, describes characteristics such as the length of the
UI/EPC
<SpecialFixcode>: <PC> & <UII/EPC>
<Status>: 1 ASCII character (see chapter 6.7)
<StartAddress>: Start address in the selected memory bank in bits, values:
0000…FFFF
<SystemCode>: = U (for read/write head IUH*)
<TagType>: 2 ASCII characters
<UII/EPC>: Unique Item Identifier, memory area of a tag in accordance with
EPC Gen 2 (ISO/IEC 18000-63), in which the EPC code is stored