User Manual
Table Of Contents
- 1 Introduction
- 2 Certificates and approvals
- 3 Product Description
- 3.1 RFID Frequency Bands
- 3.2 UHF general
- 3.3 Countries of Use
- 3.3.1 European Union
- 3.3.2 Argentina
- 3.3.3 Australia
- 3.3.4 Brazil
- 3.3.5 Canada
- 3.3.6 China
- 3.3.7 Hong Kong
- 3.3.8 India
- 3.3.9 Japan
- 3.3.10 Colombia
- 3.3.11 Malaysia
- 3.3.12 Morocco
- 3.3.13 Mexico
- 3.3.14 New Zealand
- 3.3.15 Russia
- 3.3.16 Singapore
- 3.3.17 South Korea
- 3.3.18 Thailand
- 3.3.19 United States of America
- 3.3.20 Vietnam
- 3.4 General Functions and Features
- 3.5 Indicators and Operating Elements
- 3.6 Connection
- 3.7 Scope of Delivery
- 3.8 Accessories
- 4 Installation
- 5 Commissioning
- 6 Operation
- 7 Service and Maintenance
- 8 Troubleshooting
- 9 Appendix
IUH-F192-V1-*
Troubleshooting
2022-11
59
8 Troubleshooting
Problem Solution
Interference from several
read/write heads in the
direct vicinity
• Change the setting of the transmission channels
• Reduce the transmission power
Status A message
• Check whether there are multiple tags in the detection range:
Remove the tag from the detection range by placing the tag in a
sealed metal container
Repeat the read or write operation
• Use filter commands
• Determine whether multiple tags have the same UII/EPC
Device not responding,
green LED flashing
• Set the correct country identifier. See chapter 5.2 and see chapter
3.3.