Datasheet

Germany: [phone]Pepperl+Fuchs Group
Refer to “General Notes Relating to Pepperl+Fuchs Product Information”.
USA: [phone] Singapore: [phone]
www.pepperl-fuchs.com [e-mail] [e-mail]
[e-mail]
Retroreflective sensor with polarization filter ML100-55/103/115b
2
Release date: 2017-03-31 11:28 Date of issue: 2017-03-31 221827_eng.xml
Technical data
General specifications
Effective detection range 0 ... 5 m
Reflector distance 0.01 ... 5 m
Threshold detection range 7 m
Reference target H50 reflector
Light source LED
Light type modulated visible red light
Polarization filter yes
Diameter of the light spot approx. 500 mm at a distance of 7 m
Angle of divergence approx. 4 °
Optical face frontal
Ambient light limit EN 60947-5-2:2007+A1:2012
Functional safety related parameters
MTTF
d
860 a
Mission Time (T
M
) 20 a
Diagnostic Coverage (DC) 0 %
Indicators/operating means
Operation indicator LED green: power on
Function indicator LED yellow: lights up when receiving the light beam ; flashes
when falling short of the stability control; OFF when light beam is
interrupted
Control elements sensitivity adjustment
Control elements Light-on/dark-on changeover switch
Electrical specifications
Operating voltage U
B
10 ... 30 V DC
Ripple max. 10 %
No-load supply current I
0
< 20 mA
Output
Switching type The switching type of the sensor is adjustable. The default set-
ting is: light on
Signal output 1 PNP output, short-circuit protected, reverse polarity protected,
open collector
Switching voltage max. 30 V DC
Switching current max. 100 mA , resistive load
Voltage drop U
d
≤ 1.5 V DC
Switching frequency f 1000 Hz
Response time 0.5 ms
Ambient conditions
Ambient temperature -30 ... 60 °C (-22 ... 140 °F)
Storage temperature -40 ... 70 °C (-40 ... 158 °F)
Mechanical specifications
Degree of protection IP67
Connection 300 mm fixed cable with 4-pin, M12 x 1 connector
Material
Housing PC (Polycarbonate)
Optical face PMMA
Mass approx. 20 g
Tightening torque, fastening screws 0.6 Nm
Cable length 0.3 m
Compliance with standards and directi-
ves
Directive conformity
EMC Directive 2004/108/EC EN 60947-5-2:2007+A1:2012
Standard conformity
Standards UL 60947-5-2
Approvals and certificates
EAC conformity TR CU 020/2011
UL approval cULus Listed, Class 2 Power Source or listed Power Supply
with a limited voltage output with (maybe integrated) fuse
(max. 3.3 A according UL248), Type 1 enclosure
CCC approval CCC approval / marking not required for products rated ≤36 V
Other suitable accessories can be found at
www.pepperl-fuchs.com
Accessories
OMH-F10-ML100
Mounting aid for ML100 series
OMH-ML100-01
Mounting aid for ML100 series, Mounting
bracket
OMH-ML100-02
Mounting aid for ML100 series, Mounting
bracket
OMH-ML100-03
Mounting aid for round steel ø 12 mm or
sheet 1.5 mm ... 3 mm
OMH-ML100-04
Mounting aid for ML100 series, Mounting
bracket
OMH-ML100-05
Mounting aid for ML100 series, Mounting
bracket
OMH-10
Mounting aid
REF-H85-2
Reflector, rectangular 84.5 mm x
84.5 mm, mounting holes
REF-C110-2
Reflector, round ø 84 mm, central moun-
ting hole
REF-H60-2
Reflector with mounting holes
REF-H50
Reflector, rectangular 51 mm x 61 mm,
mounting holes, fixing strap
REF-H33
Reflector with screw fixing
OFR-70-2
Reflective tape 70 mm x 70 mm
OMH-ML100-S1
Mounting bracket
OMH-ML100-08
Mounting aid for ML100 series, Snap-in