Datasheet

ManualsBrandsPepperl+Fuchs ManualsMiscellaneous Sensor AccessoriesMounting Aid Suitable for RLK28 & RLK29 Series Sensors

Industrial Doors Series 29

Zone Scanners

Pepperl+Fuchs Inc. • 1600 Enterprise Parkway • Twinsburg, Ohio 44087-2245 • www.am.pepperl-fuchs.com

Telephone (330) 486-0001 • FAX (330) 405-4710 • E-Mail: sales@us.pepperl-fuchs.com

PEPPERL+FUCHS

Series 29

Long-range Retro-reflective

Sensors

• Cost-effective with 12m (39') operating range

• Durable, ultrasonically welded IP67 housing

• Tamper-proof version with no adjustments

• Polarization filter reliably detects shiny objects

• LEDs visible from 15m (50’)

• Cross-talk immunity for mounting multiple

units together

Typical Applications

A Series 29 photoelectric sensor monitors the

threshold of an overhead door in a distribution

center for the presence of people or vehicles.

A parking garage automatic gate counts the number

of vehicles that enter or exit with a Series 29

photoelectric sensor. This is an inexpensive

alternative to inductive loop systems.

Summary of content (4 pages)

PAGE 1
Zone Scanners Series 29 • • • • • • Cost-effective with 12m (39') operating range Durable, ultrasonically welded IP67 housing Tamper-proof version with no adjustments Polarization filter reliably detects shiny objects LEDs visible from 15m (50’) Cross-talk immunity for mounting multiple units together A Series 29 photoelectric sensor monitors the threshold of an overhead door in a distribution center for the presence of people or vehicles.
PAGE 2
Zone Scanners Specifications SENSITIVITY ADJUSTMENT THRESHOLD SENSING RANGE 0-12m 0-12m No No 14m (with reflector H85) 14m (with reflector H85) 40mm-12m (with reflector FE-RR1) 40mm-12m (with reflector FE-RR1) POLARIZED FILTER Yes Yes OPERATING MODE Dark on Light on REFLECTOR DISTANCE Excess Gain vs. Sensing Range Reflectors H85 FE-RR1 H60 H160 H180 2xH180 10 3 1 0.
PAGE 3
Zone Scanners Series 29 Product Summary Opening the Terminal Compartment 1. A flat-head screwdriver is needed to open the terminal compartment. Industrial Doors 2. Insert the flat-head screwdriver into the center notch under the LED window next to the printed black door with the blade all the way to the back of this notch. 3. Push the screwdriver upward toward the direction of the LED. 4. The hinged door with printing will pivot outward, exposing the terminal compartment.
PAGE 4
Zone Scanners Accessories (cont.) 8 Mounting Bracket Model OMH-RL2-S Protective shroud braket with 360º rotatability half-clamp 1 72 43.8 9 41 63 62 43.8 Series 29 6.4 Mounting Bracket Model OMH-RL25 Low-profile right angle mounting bracket 5 37. 12 4.3 28 47 27.6 49.3 16. 22 Material: Stainless Steel Sensor is attached to this side of bracket using screws & nuts 56.3 85.7 43.8 20.0 22.1 Dovetail Mounting Clamp Model OMH-MLV11-K 70.2 ø7.