Datasheet

Subject to reasonable modifications due to technical advances. Copyright Pepperl+Fuchs, Printed in Germany
Pepperl+Fuchs Group • Tel.: Germany [phone] • USA [phone] • Singapore [phone] • Internet http://www.pepperl-fuchs.com
1
Ultrasonic sensor UB1000-18GM75-E5-V15
Release date: 2011-08-12 13:07 Date of issue: 2011-08-12 204530_eng.xml
Technical data
General specifications
Sensing range 70 ... 1000 mm
Adjustment range 90 ... 1000 mm
Unusable area 0 ... 70 mm
Standard target plate 100 mm x 100 mm
Transducer frequency approx. 255 kHz
Response delay approx. 125 ms
Indicators/operating means
LED yellow indication of the switching state
flashing: program function object detected
LED red solid red: Error
red, flashing: program function, object not detected
Electrical specifications
Operating voltage U
B
10 ... 30 V DC , ripple 10 %
SS
No-load supply current I
0
≤ 50 mA
Input/Output
Synchronization 1 synchronous connection, bi-directional
0-level: -U
B
...+1 V
1-level: +4 V...+U
B
input impedance: > 12 kΩ
synchronization pulse: ≥ 100 µs, synchronization interpulse
period: ≥ 2 ms
Synchronization frequency
Common mode operation ≤ 40 Hz
Multiplex operation ≤ 40 Hz /n, n = number of sensors
Input
Input type 1 program input,
operating range 1: -U
B
... +1 V, operating range 2: +4 V ...
+U
B
input impedance: > 4.7 kΩ; program pulse: ≥ 1 s
Output
Output type 1 switch output PNP Normally open/closed , programmable
Rated operational current I
e
200 mA , short-circuit/overload protected
Voltage drop U
d
≤ 3 V
Repeat accuracy ≤ 1 %
Switching frequency f max. 3 Hz
Range hysteresis H 1 % of the set operating distance
Temperature influence ± 1.5 % of full-scale value
Ambient conditions
Ambient temperature -25 ... 70 °C (-13 ... 158 °F)
Storage temperature -40 ... 85 °C (-40 ... 185 °F)
Mechanical specifications
Connection type Device connector M12 x 1 , 5-pin
Protection degree IP65
Material
Housing brass, nickel-plated
Transducer epoxy resin/hollow glass sphere mixture; foam
polyurethane, cover PBT
Mass 60 g
Compliance with standards and
directives
Standard conformity
Standards EN 60947-5-2:2007
IEC 60947-5-2:2007
Approvals and certificates
UL approval cULus Listed, General Purpose
CSA approval cCSAus Listed, General Purpose
Model Number
UB1000-18GM75-E5-V15
Single head system
Features
• Switch output
• 5 different output functions can be
set
• Selectable sound lobe width
• Program input
• Synchronization options
• Deactivation option
• Temperature compensation
• Very small unusable area
Diagrams
0 200 400 600 800 1000 1200 1400 1600
250
200
150
100
5
0
-50
-100
-150
-200
-250
X
Y
Characteristic response curve
Distance X [mm]
Distance Y [mm]
flat surface 100 mm x 100 mm
round bar, Ø 25 mm
wide sound lobe
narrow sound lobe